SNMP/MIB0000755000000000000000000000000012453214031007044 5ustar SNMP/MIB/INTELDCB.mib0000755000000000000000000020660412453213337011023 0ustar -- /***************************************************************************** -- ** ** -- ** Copyright 2007 2013 Intel Corporation All Rights Reserved. ** -- ** ** -- ** The material contained or described herein and all documents related ** -- ** to such material ("Material") is owned by Intel Corporation or its ** -- ** suppliers or licensors, and title to such Material remains with Intel ** -- ** Corporation or its suppliers or licensors. The Material contains ** -- ** proprietary information of Intel or its suppliers and licensors. The ** -- ** Material is protected by worldwide copyright laws and treaty ** -- ** provisions. No part of the Material may be used, copied, reproduced, ** -- ** modified, published, uploaded, posted, transmitted, distributed or ** -- ** disclosed in any way without Intel's prior express written permission. ** -- ** No license under any patent, copyright or other intellectual property ** -- ** rights in the Material is granted to or conferred upon you, either ** -- ** expressly, by implication, inducement, estoppel or otherwise. Any ** -- ** license under such intellectual property rights must be express and ** -- ** approved by Intel in writing. ** -- ** ** -- ** Unless otherwise agreed by Intel in writing, you may not remove or ** -- ** alter this notice or any other notice embedded in Materials by Intel ** -- ** or Intel’s suppliers or licensors in any way. ** -- *****************************************************************************/ -- FILE: INTELDCB.MIB -- MIB Version = 1.15.0.0 -- -- For general information and support, go to the Intel support website at: -- -- INTEL-DCB-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter64, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF physicalAdapterIndex FROM INTEL-LAN-ADAPTERS-MIB ; inteldcblan MODULE-IDENTITY LAST-UPDATED "201302110000Z" -- Feb 11, 2013 ORGANIZATION "Intel Corp" CONTACT-INFO "Intel Corp http://www.intel.com/" DESCRIPTION "The MIB module for Intel DCB SNMP agent." REVISION "201302110000Z" -- Feb 11, 2013 DESCRIPTION "Version 1.15.0 Correct DcbVersion ranges" REVISION "201210310000Z" -- Oct 31, 2012 DESCRIPTION "Version 1.14.0 Corrected Enterprise ID" REVISION "201206150000Z" -- Jun 15, 2012 DESCRIPTION "Version 1.12.0 Corrected DISPLAY-HINTS for OCTET STRINGS" ::= { enterprises 3183 } -- Categories intel OBJECT IDENTIFIER ::= { enterprises 343 } products OBJECT IDENTIFIER ::= { intel 2 } nic-products OBJECT IDENTIFIER ::= { products 7 } intel-lan-adapters OBJECT IDENTIFIER ::= { nic-products 2 } intel-dcb OBJECT IDENTIFIER ::= { nic-products 3 } InterfaceIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." SYNTAX Integer32 (1..2147483647) Ables ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value defining disable or enable" SYNTAX INTEGER {disable(0), enable(1)} DcbPgFormat ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x" STATUS current DESCRIPTION "A structure of 40 octets representing the Priority Group (PG) settings. - The first 8 octets represent the % (0..100) of link bandwidth assigned to the 8 Bandwidth Groups (BWG) (0..7). The index into the 8 octets is the BWG ID. - The other 32 octets represent an array of eight 4-octet elements. The index into the array is the User Priority (UP) (0..7). The four octets in each array element represent the following: Octet 1 is the Traffic Class (0..7) mapping of the UP. Octet 2 is the BWG ID (0..7) of the UP. Octet 3 is the % (0..100) of the BWG bandwidth assigned to the UP. Octet 4 is the strict priority setting of the UP. Which can be: 0 - normal 1 - group strict (SubType 1 only) 2 - link strict - NOTE: Octet 3 is only supported by DCBX protocol SubType 1. In SubType 2 all UPs assigned to a given BWG ID will be assigned an equal %." SYNTAX OCTET STRING ( SIZE (40) ) DcbPfcFormat ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x" STATUS current DESCRIPTION "An array of 8 octets representing the Priority Flow Control (PFC) settings for the 8 User Priorities. Each octet can take on the values: disabled (0x0), enabled (0x1) The index into the 8 octets is User Priority." SYNTAX OCTET STRING ( SIZE (8) ) DcbMapFormat ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x" STATUS current DESCRIPTION "An array of 8 octets representing the Traffic Class mapping for the 8 User Priorities. Each octet can take on the values: (0x00) through enabled (0x08) The index into the 8 octets is User Priority." SYNTAX OCTET STRING ( SIZE (8) ) DcbUpAbleFormat ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x" STATUS current DESCRIPTION "An array of 8 octets representing feature enablement for the 8 User Priorities. Each octet can take on the values: disabled (0x0), enabled (0x1) The index into the 8 octets is User Priority." SYNTAX OCTET STRING ( SIZE (8) ) -- **************************************** -- Data Center Bridging Attr Tables -- **************************************** dcbTables OBJECT IDENTIFIER ::= { intel-dcb 1 } dcbConfigTables OBJECT IDENTIFIER ::= { dcbTables 1 } -- ********************************************************************* -- Data Center Bridging Attr Tables - DcbConfig -- DCB Configuration -- ********************************************************************* dcbConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "General configuration parameters for DCB for all ports." ::= { dcbConfigTables 1 } dcbConfigEntry OBJECT-TYPE SYNTAX DcbConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DCB attributes common to all physical adapters. There is one 'entry' for each adapter." INDEX { physicalAdapterIndex } ::= { dcbConfigTable 1 } DcbConfigEntry ::= SEQUENCE { dcbConfigEnable Ables, dcbVersion Integer32, dcbOsControlledEnable Ables } dcbConfigEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Enables or Disables the DCB on the associated physical adapter." ::= { dcbConfigEntry 1 } dcbVersion OBJECT-TYPE SYNTAX Integer32 (0 .. 3) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the DCBX TLV version to be transmitted and processed by DCBX 0 - Enables version detection and support for CEE and IEEE DCBX 1 - Enables Pre-CEE DCBX TLVs 2 - Enables CEE DCBX TLVs 3 - Enables IEEE DCBX TLVs " ::= { dcbConfigEntry 2 } dcbOsControlledEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the ability for the OS to Control DCB configuration." ::= { dcbConfigEntry 3 } -- ********************************************************************* -- Data Center Bridging Attr Tables - PgConfig -- Priority Groups Configuration -- ********************************************************************* dcbPgConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbPgConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for the Priority Groups DCB feature for all ports." ::= { dcbConfigTables 2 } dcbPgConfigEntry OBJECT-TYPE SYNTAX DcbPgConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Groups attributes common to all physical adapters. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex} ::= { dcbPgConfigTable 1 } DcbPgConfigEntry ::= SEQUENCE { dcbPgConfigEnable Ables, dcbPgConfigWilling Ables, dcbPgConfigAdvertise Ables, dcbPgConfigBandwidths DcbPgFormat, dcbPgConfigNumTCs Integer32, dcbPgConfigRecBandwidths DcbPgFormat, dcbPgConfigRecEnable Ables } dcbPgConfigEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the Priority Group feature." ::= { dcbPgConfigEntry 1 } dcbPgConfigWilling OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the Willing parameter for the Priority Group feature. Enabled indicates that the local port will accept Priority Group parameters from a not Willing (disabled) peer port." ::= { dcbPgConfigEntry 2 } dcbPgConfigAdvertise OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables Priority Group parameter exchange via DCB Capabilities Exchange protocol." ::= { dcbPgConfigEntry 3 } dcbPgConfigBandwidths OBJECT-TYPE SYNTAX DcbPgFormat MAX-ACCESS read-write STATUS current DESCRIPTION "A structure of 40 octets representing the Priority Group (PG) settings. - The first 8 octets represent the % (0..100) of link bandwidth assigned to the 8 Bandwidth Groups (BWG) (0..7). The index into the 8 octets is the BWG ID. - The other 32 octets represent an array of eight 4-octet elements. The index into the array is the User Priority (UP) (0..7). The four octets in each array element represent the following: Octet 1 is the Traffic Class (0..7) mapping of the UP. Octet 2 is the BWG ID (0..7) of the UP. Use BWG ID 15 to assign UP to link strict group. Octet 3 is the % (0..100) of the BWG bandwidth assigned to the UP. Octet 4 is the strict priority setting of the UP. Which can be: 0 - normal 1 - group strict (SubType 1 only) 2 - link strict - NOTE: Octet 3 is only supported by DCBX protocol SubType 1. In SubType 2 all UPs assigned to a given BWG ID will be assigned an equal %." ::= { dcbPgConfigEntry 4 } dcbPgConfigNumTCs OBJECT-TYPE SYNTAX Integer32 (0 .. 32) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of TCs capable of supporting PG." ::= { dcbPgConfigEntry 5 } dcbPgConfigRecBandwidths OBJECT-TYPE SYNTAX DcbPgFormat MAX-ACCESS read-write STATUS current DESCRIPTION "A structure of 40 octets representing the remote Recommended Priority Group (PG) settings. (Supported only in IEEE operation) - The first 8 octets represent the % (0..100) of link bandwidth assigned to the 8 Bandwidth Groups (BWG) (0..7). The index into the 8 octets is the BWG ID. - The other 32 octets represent an array of eight 4-octet elements. The index into the array is the User Priority (UP) (0..7). The four octets in each array element represent the following: Octet 1 is the Traffic Class (0..7) mapping of the UP. Octet 2 is the BWG ID (0..7) of the UP. Use BWG ID 15 to assign UP to link strict group. Octet 3 is unused. Octet 4 is the strict priority setting of the UP. Which can be: 0 - normal 2 - link strict " ::= { dcbPgConfigEntry 6 } dcbPgConfigRecEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the remote Priority Group Recommended TLV. (Supported only in IEEE operation) " ::= { dcbPgConfigEntry 7 } -- ********************************************************************* -- Data Center Bridging Attr Tables - PgBwgConfig -- Priority Groups Bandwidth Group Configuration -- ********************************************************************* dcbPgBwgNameTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbPgBwgNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The user supplied name associated with each bandwidth group." ::= { dcbConfigTables 3 } dcbPgBwgNameEntry OBJECT-TYPE SYNTAX DcbPgBwgNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bandwidth group names per port. There is one 'entry' for each interface." INDEX {physicalAdapterIndex, dcbPgBwgId} ::= { dcbPgBwgNameTable 1 } DcbPgBwgNameEntry ::= SEQUENCE { dcbPgBwgId Integer32, dcbPgBwgName DisplayString } dcbPgBwgId OBJECT-TYPE SYNTAX Integer32 (0 .. 7) MAX-ACCESS read-only STATUS current DESCRIPTION "The Bandwidth Group ID number." ::= { dcbPgBwgNameEntry 1 } dcbPgBwgName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The user supplied name for the Bandwidth Group." ::= { dcbPgBwgNameEntry 2 } -- ************************************************************************ -- Data Center Bridging Attr Tables - PfcConfig -- Priority Flow Control Configuration -- ************************************************************************ dcbPfcConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbPfcConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Flow Control (PFC) attributes of DCB capable physical adapters." ::= { dcbConfigTables 4 } dcbPfcConfigEntry OBJECT-TYPE SYNTAX DcbPfcConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Flow Control (PFC) settings for all User Priorities per port. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex} ::= { dcbPfcConfigTable 1 } DcbPfcConfigEntry ::= SEQUENCE { dcbPfcConfigEnable Ables, dcbPfcConfigWilling Ables, dcbPfcConfigAdvertise Ables, dcbPfcConfigSettings DcbPfcFormat, dcbPfcConfigNumTCs Integer32 } dcbPfcConfigEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the Priority Flow Control feature." ::= { dcbPfcConfigEntry 1 } dcbPfcConfigWilling OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the Willing parameter for the Priority Flow Control feature. Enabled indicates that the local port will accept Priority Flow Control parameters from a not Willing (disabled) peer port." ::= { dcbPfcConfigEntry 2 } dcbPfcConfigAdvertise OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the advertising Priority Flow Control parameters for this port to the peer via the protocol." ::= { dcbPfcConfigEntry 3 } dcbPfcConfigSettings OBJECT-TYPE SYNTAX DcbPfcFormat MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative Priority Flow Control (PFC) settings. An array of 8 octets representing the PFC settings for the 8 User Priorities. Each octet can take on the values: disabled (0x0), enabled (0x1) The index into the 8 octets is User Priority. " ::= { dcbPfcConfigEntry 4 } dcbPfcConfigNumTCs OBJECT-TYPE SYNTAX Integer32 (0 .. 32) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of TCs capable of supporting PFC." ::= { dcbPfcConfigEntry 5 } -- ************************************************************************ -- Data Center Bridging Attr Tables - FcoeConfig -- FCoE Application Configuration -- ************************************************************************ dcbFcoeConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbFcoeConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FCoE Application attributes of DCB capable physical adapters." ::= { dcbConfigTables 5 } dcbFcoeConfigEntry OBJECT-TYPE SYNTAX DcbFcoeConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one 'entry' for each adapter." INDEX {physicalAdapterIndex, dcbFcoeSubType} ::= { dcbFcoeConfigTable 1 } DcbFcoeConfigEntry ::= SEQUENCE { dcbFcoeConfigEnable Ables, dcbFcoeConfigWilling Ables, dcbFcoeConfigAdvertise Ables, dcbFcoeConfigData OCTET STRING, dcbFcoeConfigSelector Integer32, dcbFcoeConfigIdentifier OCTET STRING } dcbFcoeConfigEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the FCoE Application feature." ::= { dcbFcoeConfigEntry 1 } dcbFcoeConfigWilling OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the Willing parameter for the FCoE Application feature. Enabled indicates that the local port will accept FCoE Application parameters from a not Willing (disabled) peer port." ::= { dcbFcoeConfigEntry 2 } dcbFcoeConfigAdvertise OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the advertising FCoE Application parameters for this port to the peer via the protocol." ::= { dcbFcoeConfigEntry 3 } dcbFcoeConfigData OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (1) ) MAX-ACCESS read-write STATUS current DESCRIPTION "FCoE Application specific configuration." ::= { dcbFcoeConfigEntry 4 } dcbFcoeConfigSelector OBJECT-TYPE SYNTAX Integer32 (0 .. 4) MAX-ACCESS read-write STATUS current DESCRIPTION "The local selector to specify the method of identifying FCoE traffic. (Supported only in IEEE operation) 0x01 - Ethertype 0x02 - Well Known Port number over TCP, SCTP 0x03 - Well Known Port number over UDP, DCCP 0x04 - Well Known Port number over TCP, SCTP, UDP, DCCP " ::= { dcbFcoeConfigEntry 5 } dcbFcoeConfigIdentifier OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (2) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The local traffic identifier for the FCoE Application feature. (Supported only in IEEE operation) " ::= { dcbFcoeConfigEntry 6 } -- ************************************************************************ -- Data Center Bridging Attr Tables - iScsiFcoeConfig -- iSCSI Application Configuration -- ************************************************************************ dcbiScsiConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbiScsiConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "iSCSI Application attributes of DCB capable physical adapters." ::= { dcbConfigTables 7 } dcbiScsiConfigEntry OBJECT-TYPE SYNTAX DcbiScsiConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one 'entry' for each adapter." INDEX {physicalAdapterIndex, dcbiScsiSubType} ::= { dcbiScsiConfigTable 1 } DcbiScsiConfigEntry ::= SEQUENCE { dcbiScsiConfigEnable Ables, dcbiScsiConfigWilling Ables, dcbiScsiConfigAdvertise Ables, dcbiScsiConfigData OCTET STRING, dcbiScsiConfigSelector Integer32, dcbiScsiConfigIdentifier OCTET STRING } dcbiScsiConfigEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the iSCSI Application feature." ::= { dcbiScsiConfigEntry 1 } dcbiScsiConfigWilling OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the Willing parameter for the iSCSI Application feature. Enabled indicates that the local port will accept iSCSI Application parameters from a not Willing (disabled) peer port." ::= { dcbiScsiConfigEntry 2 } dcbiScsiConfigAdvertise OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or Disables the advertising iSCSI Application parameters for this port to the peer via the protocol." ::= { dcbiScsiConfigEntry 3 } dcbiScsiConfigData OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (1) ) MAX-ACCESS read-write STATUS current DESCRIPTION "iSCSI Application specific configuration. " ::= { dcbiScsiConfigEntry 4 } dcbiScsiConfigSelector OBJECT-TYPE SYNTAX Integer32 (0 .. 4) MAX-ACCESS read-write STATUS current DESCRIPTION "The local selector to specify the method of identifying iSCSI traffic. (Supported only in IEEE operation) 0x01 - Ethertype 0x02 - Well Known Port number over TCP, SCTP 0x03 - Well Known Port number over UDP, DCCP 0x04 - Well Known Port number over TCP, SCTP, UDP, DCCP " ::= { dcbiScsiConfigEntry 5 } dcbiScsiConfigIdentifier OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (2) ) MAX-ACCESS read-write STATUS current DESCRIPTION "The local traffic identifier for the iSCSI Application feature. (Supported only in IEEE operation) " ::= { dcbiScsiConfigEntry 6 } -- ********************************************************************* -- Data Center Bridging Attr Tables - Operational Status -- ********************************************************************* dcbOperTables OBJECT IDENTIFIER ::= { dcbTables 2 } -- ************************************************************************ -- Data Center Bridging Operational Attr Tables - PgOper -- Priority Groups Operational Status -- ************************************************************************ dcbPgOperTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbPgOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for the Priority Groups DCB feature for all ports." ::= { dcbOperTables 1 } dcbPgOperEntry OBJECT-TYPE SYNTAX DcbPgOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Groups attributes common to all physical adapters. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex} ::= { dcbPgOperTable 1 } DcbPgOperEntry ::= SEQUENCE { dcbPgOperVersion Integer32, dcbPgOperMaxVersion Integer32, dcbPgOperError Integer32, dcbPgOperMode Ables, dcbPgOperSyncd Integer32, dcbPgOperBandwidths DcbPgFormat, dcbPgOperMappingUPtoTC DcbMapFormat } dcbPgOperVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational protocol version of the Priority Groups feature." ::= { dcbPgOperEntry 1 } dcbPgOperMaxVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The highest protocol version supported by the implementation of the Priority Groups feature." ::= { dcbPgOperEntry 2 } dcbPgOperError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current error status of the Priority Groups feature. Bits in the Error value are defined as: 0x00 - no error 0x01 - feature mismatch with peer 0x02 - error setting feature configuration 0x04 - multiple feature TLVs received from peer 0x08 - peer error 0x10 - multiple LLDP neighbors present 0x20 - feature not present in peer tlv " ::= { dcbPgOperEntry 3 } dcbPgOperMode OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the Priority Group feature. " ::= { dcbPgOperEntry 4 } dcbPgOperSyncd OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current synced state of the feature relative to the peer device. " ::= { dcbPgOperEntry 5 } dcbPgOperBandwidths OBJECT-TYPE SYNTAX DcbPgFormat MAX-ACCESS read-only STATUS current DESCRIPTION "A structure of 40 octets representing the Priority Group (PG) settings. - The first 8 octets represent the % (0..100) of link bandwidth assigned to the 8 Bandwidth Groups (BWG) (0..7). The index into the 8 octets is the BWG ID. - The other 32 octets represent an array of eight 4-octet elements. The index into the array is the User Priority (UP) (0..7). The four octets in each array element represent the following: Octet 1 is the Traffic Class (0..7) mapping of the UP. Octet 2 is the BWG ID (0..7) of the UP. Octet 3 is the % (0..100) of the BWG bandwidth assigned to the UP. Octet 4 is the strict priority setting of the UP. Which can be: 0 - normal 1 - group strict (SubType 1 only) 2 - link strict - NOTE: Octet 3 is only supported by DCBX protocol SubType 1. In SubType 2 all UPs assigned to a given BWG ID will be assigned an equal %." ::= { dcbPgOperEntry 6 } dcbPgOperMappingUPtoTC OBJECT-TYPE SYNTAX DcbMapFormat MAX-ACCESS read-only STATUS current DESCRIPTION "This field contains the operational mapping of UP to TC." ::= { dcbPgOperEntry 7 } -- ************************************************************************ -- Data Center Bridging Attr Tables - PfcOper -- Priority Flow Control Operational Status -- ************************************************************************ dcbPfcOperTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbPfcOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Flow Control (PFC) attributes of DCB capable physical adapters." ::= { dcbOperTables 2 } dcbPfcOperEntry OBJECT-TYPE SYNTAX DcbPfcOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Flow Control (PFC) settings for all User Priorities per port. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex} ::= { dcbPfcOperTable 1 } DcbPfcOperEntry ::= SEQUENCE { dcbPfcOperVersion Integer32, dcbPfcOperMaxVersion Integer32, dcbPfcOperError Integer32, dcbPfcOperMode Ables, dcbPfcOperSyncd Integer32, dcbPfcOperSettings DcbPfcFormat } dcbPfcOperVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational protocol version of the Priority Flow Control feature." ::= { dcbPfcOperEntry 1 } dcbPfcOperMaxVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The highest protocol version supported by the implementation of the Priority Flow Control feature." ::= { dcbPfcOperEntry 2 } dcbPfcOperError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current error status of the Priority Flow Control feature. Bits in the Error value are defined as: 0x00 - no error 0x01 - feature mismatch with peer 0x02 - error setting feature configuration 0x04 - multiple feature TLVs received from peer 0x08 - peer error 0x10 - multiple LLDP neighbors present 0x20 - feature not present in peer tlv" ::= { dcbPfcOperEntry 3 } dcbPfcOperMode OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the Priority Flow Control feature." ::= { dcbPfcOperEntry 4 } dcbPfcOperSyncd OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current synced state of the feature relative to the peer device." ::= { dcbPfcOperEntry 5 } dcbPfcOperSettings OBJECT-TYPE SYNTAX DcbPfcFormat MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative Priority Flow Control (PFC) settings. An array of 8 octets representing the PFC settings for the 8 User Priorities. Each octet can take on the values: disabled (0x0), enabled (0x1) The index into the 8 octets is User Priority. " ::= { dcbPfcOperEntry 6 } -- ************************************************************************ -- Data Center Bridging Attr Tables - FcoeOper -- Application Operational Status -- ************************************************************************ dcbFcoeOperTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbFcoeOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FCoE Application attributes of DCB capable physical adapters." ::= { dcbOperTables 3 } dcbFcoeOperEntry OBJECT-TYPE SYNTAX DcbFcoeOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FCoE Application settings for all User Priorities per port. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex, dcbFcoeSubType} ::= { dcbFcoeOperTable 1 } DcbFcoeOperEntry ::= SEQUENCE { dcbFcoeOperVersion Integer32, dcbFcoeOperMaxVersion Integer32, dcbFcoeOperError Integer32, dcbFcoeOperMode Ables, dcbFcoeOperSyncd Integer32, dcbFcoeOperData OCTET STRING, dcbFcoeSubType Integer32, dcbFcoeOperSelector Integer32, dcbFcoeOperIdentifier OCTET STRING } dcbFcoeOperVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational protocol version of the FCoE Application:subtype feature." ::= { dcbFcoeOperEntry 1 } dcbFcoeOperMaxVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The highest protocol version supported by the implementation of the FCoE Application:subtype feature." ::= { dcbFcoeOperEntry 2 } dcbFcoeOperError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current error status of the FCoE Application:subtype feature. Bits in the Error value are defined as: 0x00 - no error 0x01 - feature mismatch with peer 0x02 - error setting feature configuration 0x04 - multiple feature TLVs received from peer 0x08 - peer error 0x10 - multiple LLDP neighbors present 0x20 - feature not present in peer tlv" ::= { dcbFcoeOperEntry 3 } dcbFcoeOperMode OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the FCoE Application:subtype feature." ::= { dcbFcoeOperEntry 4 } dcbFcoeOperSyncd OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current synced state of the FCoE Application feature relative to the peer device." ::= { dcbFcoeOperEntry 5 } dcbFcoeOperData OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (1) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational FCoE Application specific configuration." ::= { dcbFcoeOperEntry 6 } dcbFcoeSubType OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the SubType of the FCoE Application feature." ::= { dcbFcoeOperEntry 7 } dcbFcoeOperSelector OBJECT-TYPE SYNTAX Integer32 (0 .. 4) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational selector to specify the method of identifying FCoE traffic. (Supported only in IEEE operation) 0x01 - Ethertype 0x02 - Well Known Port number over TCP, SCTP 0x03 - Well Known Port number over UDP, DCCP 0x04 - Well Known Port number over TCP, SCTP, UDP, DCCP " ::= { dcbFcoeOperEntry 8 } dcbFcoeOperIdentifier OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (2) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational traffic identifier for the FCoE Application feature. (Supported only in IEEE operation) " ::= { dcbFcoeOperEntry 9 } -- ************************************************************************ -- Data Center Bridging Attr Tables - iScsiFcoeOper -- iSCSI Application Operational Status -- ************************************************************************ dcbiScsiOperTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbiScsiOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "iSCSI Application attributes of DCB capable physical adapters." ::= { dcbOperTables 5 } dcbiScsiOperEntry OBJECT-TYPE SYNTAX DcbiScsiOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "iSCSI Application settings for all User Priorities per port. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex, dcbiScsiSubType} ::= { dcbiScsiOperTable 1 } DcbiScsiOperEntry ::= SEQUENCE { dcbiScsiOperVersion Integer32, dcbiScsiOperMaxVersion Integer32, dcbiScsiOperError Integer32, dcbiScsiOperMode Ables, dcbiScsiOperSyncd Integer32, dcbiScsiOperData OCTET STRING, dcbiScsiSubType Integer32, dcbiScsiOperSelector Integer32, dcbiScsiOperIdentifier OCTET STRING } dcbiScsiOperVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational protocol version of the iSCSI Application:subtype feature." ::= { dcbiScsiOperEntry 1 } dcbiScsiOperMaxVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The highest protocol version supported by the implementation of the iSCSI Application:subtype feature." ::= { dcbiScsiOperEntry 2 } dcbiScsiOperError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current error status of the iSCSI Application:subtype feature. Bits in the Error value are defined as: 0x00 - no error 0x01 - feature mismatch with peer 0x02 - error setting feature configuration 0x04 - multiple feature TLVs received from peer 0x08 - peer error 0x10 - multiple LLDP neighbors present 0x20 - feature not present in peer tlv" ::= { dcbiScsiOperEntry 3 } dcbiScsiOperMode OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the iSCSI Application:subtype feature." ::= { dcbiScsiOperEntry 4 } dcbiScsiOperSyncd OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current synced state of the iSCSI Application feature relative to the peer device. " ::= { dcbiScsiOperEntry 5 } dcbiScsiOperData OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (1) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational iSCSI Application specific configuration." ::= { dcbiScsiOperEntry 6 } dcbiScsiSubType OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the SubType of the iSCSI Application feature." ::= { dcbiScsiOperEntry 7 } dcbiScsiOperSelector OBJECT-TYPE SYNTAX Integer32 (0 .. 4) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational selector to specify the method of identifying iSCSI traffic. (Supported only in IEEE operation) 0x01 - Ethertype 0x02 - Well Known Port number over TCP, SCTP 0x03 - Well Known Port number over UDP, DCCP 0x04 - Well Known Port number over TCP, SCTP, UDP, DCCP " ::= { dcbiScsiOperEntry 8 } dcbiScsiOperIdentifier OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (2) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational traffic identifier for the iSCSI Application feature. (Supported only in IEEE operation) " ::= { dcbiScsiOperEntry 9 } -- ************************************************************************ -- Data Center Bridging Attr Tables - DcbOper -- DCB Operational Status -- ************************************************************************ dcbOperTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "General configuration parameters for DCB for all physical adapters." ::= { dcbOperTables 6 } dcbOperEntry OBJECT-TYPE SYNTAX DcbOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DCB attributes common to all physical adapters. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex} ::= { dcbOperTable 1 } DcbOperEntry ::= SEQUENCE { dcbOperVersion Integer32 } dcbOperVersion OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The DCBX TLV version currently transmitted by DCBX 1 - Pre-CEE DCBX TLVs 2 - CEE DCBX TLVs 3 - IEEE DCBX TLVs " ::= { dcbOperEntry 1 } -- ********************************************************************* -- Data Center Bridging Attr Tables - Peer Status -- ********************************************************************* dcbPeerTables OBJECT IDENTIFIER ::= { dcbTables 3 } -- ************************************************************************ -- Data Center Bridging Peer Attr Tables - PgPeer -- Priority Groups Peer Status -- ************************************************************************ dcbPgPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbPgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration parameters for the Priority Groups DCB feature for all ports." ::= { dcbPeerTables 1 } dcbPgPeerEntry OBJECT-TYPE SYNTAX DcbPgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Groups attributes common to all physical adapters. There is one entry for each adapter." INDEX {physicalAdapterIndex} ::= { dcbPgPeerTable 1 } DcbPgPeerEntry ::= SEQUENCE { dcbPgPeerEnable Ables, dcbPgPeerWilling Ables, dcbPgPeerVersion Integer32, dcbPgPeerMaxVersion Integer32, dcbPgPeerError Integer32, dcbPgPeerBandwidths DcbPgFormat, dcbPgPeerNumTCs Integer32 } dcbPgPeerEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Enable state of the peer's Priority Group feature." ::= { dcbPgPeerEntry 1 } dcbPgPeerWilling OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Willing state of the peer's Priority Group feature." ::= { dcbPgPeerEntry 2 } dcbPgPeerVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's operational protocol version of the Priority Groups feature." ::= { dcbPgPeerEntry 3 } dcbPgPeerMaxVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's highest protocol version supported by the implementation of the Priority Groups feature." ::= { dcbPgPeerEntry 4 } dcbPgPeerError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's error flag for the Priority Groups feature. " ::= { dcbPgPeerEntry 5 } dcbPgPeerBandwidths OBJECT-TYPE SYNTAX DcbPgFormat MAX-ACCESS read-only STATUS current DESCRIPTION "A structure of 40 octets representing the Priority Group (PG) settings. - The first 8 octets represent the % (0..100) of link bandwidth assigned to the 8 Bandwidth Groups (BWG) (0..7). The index into the 8 octets is the BWG ID. - The other 32 octets represent an array of eight 4-octet elements. The index into the array is the User Priority (UP) (0..7). The four octets in each array element represent the following: Octet 1 is undefined. Octet 2 is the BWG ID (0..7) of the UP. Octet 3 is the % (0..100) of the BWG bandwidth assigned to the UP. Octet 4 is the strict priority setting of the UP. Which can be: 0 - normal 1 - group strict (SubType 1 only) 2 - link strict - NOTE: Octet 3 is only supported by DCBX protocol SubType 1. In SubType 2 all UPs assigned to a given BWG ID will be assigned an equal %." ::= { dcbPgPeerEntry 6 } dcbPgPeerNumTCs OBJECT-TYPE SYNTAX Integer32 (0 .. 32) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of TCs capable of supporting PG." ::= { dcbPgPeerEntry 7 } -- ************************************************************************ -- Data Center Bridging Attr Tables - PfcPeer -- Priority Flow Control Configuration -- ************************************************************************ dcbPfcPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbPfcPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Flow Control (PFC) attributes of DCB capable physical adapters." ::= { dcbPeerTables 2 } dcbPfcPeerEntry OBJECT-TYPE SYNTAX DcbPfcPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Flow Control (PFC) settings for all User Priorities per port. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex} ::= { dcbPfcPeerTable 1 } DcbPfcPeerEntry ::= SEQUENCE { dcbPfcPeerEnable Ables, dcbPfcPeerWilling Ables, dcbPfcPeerVersion Integer32, dcbPfcPeerMaxVersion Integer32, dcbPfcPeerError Integer32, dcbPfcPeerSettings DcbPfcFormat, dcbPfcPeerNumTCs Integer32 } dcbPfcPeerEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Enable state of the peer's Priority Flow Control feature." ::= { dcbPfcPeerEntry 1 } dcbPfcPeerWilling OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Willing state of the peer's Priority Flow Control feature." ::= { dcbPfcPeerEntry 2 } dcbPfcPeerVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's operational protocol version of the Priority Flow Control feature." ::= { dcbPfcPeerEntry 3 } dcbPfcPeerMaxVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's highest protocol version supported by the implementation of the Priority Flow Control feature." ::= { dcbPfcPeerEntry 4 } dcbPfcPeerError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's error flag for the Priority Flow Control feature. " ::= { dcbPfcPeerEntry 5 } dcbPfcPeerSettings OBJECT-TYPE SYNTAX DcbPfcFormat MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's Priority Flow Control (PFC) settings. An array of 8 octets representing the PFC settings for the 8 User Priorities. Each octet can take on the values: disabled (0x0), enabled (0x1) The index into the 8 octets is User Priority. " ::= { dcbPfcPeerEntry 6 } dcbPfcPeerNumTCs OBJECT-TYPE SYNTAX Integer32 (0 .. 32) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of TCs capable of supporting PFC." ::= { dcbPfcPeerEntry 7 } -- ************************************************************************ -- Data Center Bridging Attr Tables - FcoePeer -- Application Configuration -- ************************************************************************ dcbFcoePeerTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbFcoePeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Application attributes of DCB capable physical adapters." ::= { dcbPeerTables 3 } dcbFcoePeerEntry OBJECT-TYPE SYNTAX DcbFcoePeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FCoE Application settings for all User Priorities per port. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex, dcbFcoeSubType} ::= { dcbFcoePeerTable 1 } DcbFcoePeerEntry ::= SEQUENCE { dcbFcoePeerEnable Ables, dcbFcoePeerWilling Ables, dcbFcoePeerVersion Integer32, dcbFcoePeerMaxVersion Integer32, dcbFcoePeerError Integer32, dcbFcoePeerData OCTET STRING, dcbFcoePeerSelector Integer32, dcbFcoePeerIdentifier OCTET STRING } dcbFcoePeerEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Enable state of the peer's FCoE Application feature." ::= { dcbFcoePeerEntry 1 } dcbFcoePeerWilling OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Willing state of the peer's FCoE Application feature. (Not valid in IEEE operation)" ::= { dcbFcoePeerEntry 2 } dcbFcoePeerVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's operational protocol version of the FCoE Application feature." ::= { dcbFcoePeerEntry 3 } dcbFcoePeerMaxVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's highest protocol version supported by the implementation of the FCoE Application feature." ::= { dcbFcoePeerEntry 4 } dcbFcoePeerError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's error flag for the FCoE Application feature." ::= { dcbFcoePeerEntry 5 } dcbFcoePeerData OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (1) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's operational FCoE Application specific configuration." ::= { dcbFcoePeerEntry 6 } dcbFcoePeerSelector OBJECT-TYPE SYNTAX Integer32 (0 .. 4) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's selector to specify the method of identifying FCoE traffic. (Supported only in IEEE operation) 0x01 - Ethertype 0x02 - Well Known Port number over TCP, SCTP 0x03 - Well Known Port number over UDP, DCCP 0x04 - Well Known Port number over TCP, SCTP, UDP, DCCP " ::= { dcbFcoePeerEntry 7 } dcbFcoePeerIdentifier OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (2) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's traffic identifier for the FCoE Application feature. (Supported only in IEEE operation) " ::= { dcbFcoePeerEntry 8 } -- ************************************************************************ -- Data Center Bridging Attr Tables - iScsiFcoePeer -- iSCSI Application Configuration -- ************************************************************************ dcbiScsiPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbiScsiPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "iSCSI Application attributes of DCB capable physical adapters." ::= { dcbPeerTables 5 } dcbiScsiPeerEntry OBJECT-TYPE SYNTAX DcbiScsiPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "iSCSI Application settings for all User Priorities per port. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex, dcbiScsiSubType} ::= { dcbiScsiPeerTable 1 } DcbiScsiPeerEntry ::= SEQUENCE { dcbiScsiPeerEnable Ables, dcbiScsiPeerWilling Ables, dcbiScsiPeerVersion Integer32, dcbiScsiPeerMaxVersion Integer32, dcbiScsiPeerError Integer32, dcbiScsiPeerData OCTET STRING, dcbiScsiPeerSelector Integer32, dcbiScsiPeerIdentifier OCTET STRING } dcbiScsiPeerEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Enable state of the peer's iSCSI Application feature." ::= { dcbiScsiPeerEntry 1 } dcbiScsiPeerWilling OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-only STATUS current DESCRIPTION "Willing state of the peer's iSCSI Application feature. (Not valid in IEEE operation)" ::= { dcbiScsiPeerEntry 2 } dcbiScsiPeerVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's operational protocol version of the iSCSI Application feature." ::= { dcbiScsiPeerEntry 3 } dcbiScsiPeerMaxVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's highest protocol version supported by the implementation of the iSCSI Application feature." ::= { dcbiScsiPeerEntry 4 } dcbiScsiPeerError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's error flag for the iSCSI Application feature." ::= { dcbiScsiPeerEntry 5 } dcbiScsiPeerData OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (1) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's iSCSI Application specific configuration." ::= { dcbiScsiPeerEntry 6 } dcbiScsiPeerSelector OBJECT-TYPE SYNTAX Integer32 (0 .. 4) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's selector to specify the method of identifying iSCSI traffic. (Supported only in IEEE operation) 0x01 - Ethertype 0x02 - Well Known Port number over TCP, SCTP 0x03 - Well Known Port number over UDP, DCCP 0x04 - Well Known Port number over TCP, SCTP, UDP, DCCP " ::= { dcbiScsiPeerEntry 7 } dcbiScsiPeerIdentifier OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (2) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's traffic identifier for the iSCSI Application feature. (Supported only in IEEE operation) " ::= { dcbiScsiPeerEntry 8 } -- ********************************************************************* -- Data Center Bridging Attr Tables - StatisticsTables -- ********************************************************************* dcbStatisticsTables OBJECT IDENTIFIER ::= { dcbTables 4 } -- ************************************************************************ -- Data Center Bridging Attr Tables - PgStats -- ************************************************************************ dcbPgStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbPgStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics entry for DCB Priority Grouping feature." ::= { dcbStatisticsTables 1 } dcbPgStatsEntry OBJECT-TYPE SYNTAX DcbPgStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Group statistics common to all Physical Adapters. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex, pgTrafficClassIndex} ::= { dcbPgStatsTable 1 } DcbPgStatsEntry ::= SEQUENCE { dcbPgStatsInFrames Counter64, dcbPgStatsOutFrames Counter64, dcbPgStatsOutFrmOverflowDiscards Counter64, dcbPgStatsInFrmOverflowDiscards Counter64, dcbPgStatsInOctets Counter64, dcbPgStatsOutOctets Counter64, pgTrafficClassIndex Integer32 } dcbPgStatsInFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received for this class" ::= { dcbPgStatsEntry 1 } dcbPgStatsOutFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets transmitted for this class" ::= { dcbPgStatsEntry 2 } dcbPgStatsOutFrmOverflowDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames discarded at this class due resource overflow (congestion - Q, buffer overflow)" ::= { dcbPgStatsEntry 3 } dcbPgStatsInFrmOverflowDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames discarded at this class due resource overflow (congestion - Q, buffer overflow)" ::= { dcbPgStatsEntry 4 } dcbPgStatsInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received for this class" ::= { dcbPgStatsEntry 5 } dcbPgStatsOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted for this class" ::= { dcbPgStatsEntry 6 } pgTrafficClassIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Traffic Class" ::= { dcbPgStatsEntry 7 } -- ************************************************************************ -- Data Center Bridging Attr Tables - PfcStats -- ************************************************************************ dcbPfcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DcbPfcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics table for DCB Priority Flow Control feature." ::= { dcbStatisticsTables 2 } dcbPfcStatsEntry OBJECT-TYPE SYNTAX DcbPfcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority Flow Control statistics common to all Physical Adapters. There is one 'entry' for each adapter." INDEX {physicalAdapterIndex, pfcUserPriorityIndex} ::= { dcbPfcStatsTable 1 } DcbPfcStatsEntry ::= SEQUENCE { dcbPfcStatsInXoffFrames Counter64, dcbPfcStatsInXonFrames Counter64, dcbPfcStatsOutXoffFrames Counter64, dcbPfcStatsOutXonFrames Counter64, dcbPfcStatsXonToXoffs Counter64, pfcUserPriorityIndex Integer32 } dcbPfcStatsInXoffFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Priority Flow Control Xoff frames received" ::= { dcbPfcStatsEntry 1 } dcbPfcStatsInXonFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Priority Flow Control Xon frames received" ::= { dcbPfcStatsEntry 2 } dcbPfcStatsOutXoffFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Priority Flow Control Xoff frames transmitted" ::= { dcbPfcStatsEntry 3 } dcbPfcStatsOutXonFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Priority Flow Control Xon frames transmitted" ::= { dcbPfcStatsEntry 4 } dcbPfcStatsXonToXoffs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times status has transitioned from 'not paused' to 'paused'." ::= { dcbPfcStatsEntry 5 } pfcUserPriorityIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "User Priority" ::= { dcbPfcStatsEntry 6 } -- ****** -- events -- ****** events OBJECT IDENTIFIER ::= { intel-dcb 2 } -- ********************** -- DCB Events -- ********************** dcbEvents OBJECT IDENTIFIER ::= { events 5 } dcbTraps OBJECT IDENTIFIER ::= { dcbEvents 1 } dcbPgOperStatusChangedTrap NOTIFICATION-TYPE OBJECTS { physicalAdapterIndex, dcbPgOperMode, dcbPgOperBandwidths, dcbPgOperMappingUPtoTC} STATUS current DESCRIPTION "The Priority Groups operational mode or operational configuration for the adapter has changed." ::= { dcbTraps 1 } dcbPfcOperStatusChangedTrap NOTIFICATION-TYPE OBJECTS { physicalAdapterIndex, dcbPfcOperMode, dcbPfcOperSettings } STATUS current DESCRIPTION "The Priority Flow Control operational mode or operational configuration for the adapter has changed." ::= { dcbTraps 2 } dcbFcoeOperStatusChangedTrap NOTIFICATION-TYPE OBJECTS { physicalAdapterIndex, dcbFcoeSubType, dcbFcoeOperMode, dcbFcoeOperData } STATUS current DESCRIPTION "The FCoE Application:SubType operational mode or operational configuration for the adapter has changed." ::= { dcbTraps 3 } dcbiScsiOperStatusChangedTrap NOTIFICATION-TYPE OBJECTS { physicalAdapterIndex, dcbiScsiSubType, dcbiScsiOperMode, dcbiScsiOperData } STATUS current DESCRIPTION "The iSCSI Application:SubType operational mode or operational configuration for the adapter has changed." ::= { dcbTraps 5 } dcbPgOperStatusChgTrapEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable traps for the adapter's Priority Group Oper mode/configuration changed condition. The user can set this value." ::= { dcbEvents 2 } dcbPfcOperStatusChgTrapEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable traps for the adapter's Priority Flow Control Oper mode/configuration changed condition. The user can set this value." ::= { dcbEvents 3 } dcbFcoeOperStatusChgTrapEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable traps for the adapter's FCoE Application Oper mode/configuration changed condition. The user can set this value." ::= { dcbEvents 4 } dcbiScsiOperStatusChgTrapEnable OBJECT-TYPE SYNTAX Ables MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable traps for the adapter's iSCSI Application Oper mode/configuration changed condition. The user can set this value." ::= { dcbEvents 6 } -- -- Compliance Statements -- inteldcblanConformance OBJECT IDENTIFIER ::= { inteldcblan 1 } dcbiScsiGroups OBJECT IDENTIFIER ::= { inteldcblanConformance 5 } dcbPgGroups OBJECT IDENTIFIER ::= { inteldcblanConformance 10 } dcbPfcGroups OBJECT IDENTIFIER ::= { inteldcblanConformance 15 } dcbFcoeGroups OBJECT IDENTIFIER ::= { inteldcblanConformance 20 } dcbMiscGroups OBJECT IDENTIFIER ::= { inteldcblanConformance 25 } dcbNotificationGroups OBJECT IDENTIFIER ::= { inteldcblanConformance 12 } inteldcblanCompliances OBJECT IDENTIFIER ::= { inteldcblanConformance 30 } inteldcblanCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statements for the Intel DCB Lan Agent." MODULE -- this module MANDATORY-GROUPS { dcbiScsiGroup, dcbPgGroup, dcbPfcGroup, dcbFcoeGroup, dcbMiscGroup, dcbNotificationGroup } ::= { inteldcblanCompliances 1 } dcbiScsiGroup OBJECT-GROUP OBJECTS { dcbiScsiConfigEnable,dcbiScsiConfigWilling,dcbiScsiConfigAdvertise,dcbiScsiConfigData, dcbiScsiConfigSelector, dcbiScsiConfigIdentifier, dcbiScsiOperVersion,dcbiScsiOperMaxVersion,dcbiScsiOperError, dcbiScsiOperMode,dcbiScsiOperSyncd,dcbiScsiSubType, dcbiScsiOperSelector, dcbiScsiOperIdentifier, dcbiScsiPeerEnable,dcbiScsiPeerWilling,dcbiScsiPeerVersion, dcbiScsiPeerMaxVersion,dcbiScsiPeerError,dcbiScsiPeerData, dcbiScsiPeerSelector, dcbiScsiPeerIdentifier, dcbiScsiOperStatusChgTrapEnable } STATUS current DESCRIPTION "A collection for Dcb iSCSI Group" ::= { dcbiScsiGroups 1 } dcbPgGroup OBJECT-GROUP OBJECTS { dcbPgConfigEnable, dcbPgConfigRecEnable, dcbPgConfigWilling, dcbPgConfigAdvertise, dcbPgConfigBandwidths, dcbPgConfigNumTCs, dcbPgBwgId, dcbPgBwgName, dcbPgConfigRecBandwidths, dcbPgPeerEnable, dcbPgPeerWilling, dcbPgPeerVersion, dcbPgPeerMaxVersion, dcbPgPeerError, dcbPgPeerBandwidths, dcbPgPeerNumTCs, dcbiScsiOperData, dcbPgStatsInFrames, pgTrafficClassIndex, pfcUserPriorityIndex, dcbPgStatsOutFrames, dcbPgStatsOutFrmOverflowDiscards, dcbPgStatsInFrmOverflowDiscards, dcbPgStatsInOctets, dcbPgStatsOutOctets, dcbPgOperStatusChgTrapEnable, dcbPgOperBandwidths, dcbPgOperMappingUPtoTC, dcbPgOperSyncd, dcbPgOperMode, dcbPgOperError, dcbPgOperMaxVersion, dcbPgOperVersion } STATUS current DESCRIPTION "A collection for Dcb Pg Group" ::= { dcbPgGroups 1 } dcbPfcGroup OBJECT-GROUP OBJECTS { dcbPfcConfigEnable, dcbPfcConfigWilling, dcbPfcConfigAdvertise, dcbPfcConfigSettings, dcbPfcConfigNumTCs, dcbPfcPeerEnable, dcbPfcPeerWilling, dcbPfcPeerVersion, dcbPfcPeerMaxVersion, dcbPfcPeerError, dcbPfcPeerSettings, dcbPfcPeerNumTCs, dcbPfcStatsInXoffFrames, dcbPfcStatsInXonFrames, dcbPfcStatsOutXoffFrames, dcbPfcStatsOutXonFrames, dcbPfcStatsXonToXoffs, dcbPfcOperStatusChgTrapEnable, dcbPfcOperSettings, dcbPfcOperSyncd, dcbPfcOperMode, dcbPfcOperError, dcbPfcOperMaxVersion, dcbPfcOperVersion } STATUS current DESCRIPTION "A collection for Dcb Pfc Group" ::= { dcbPfcGroups 1 } dcbFcoeGroup OBJECT-GROUP OBJECTS { dcbFcoeConfigEnable, dcbFcoeConfigSelector, dcbFcoeConfigIdentifier, dcbFcoeConfigWilling, dcbFcoeConfigAdvertise, dcbFcoeConfigData, dcbFcoePeerEnable, dcbFcoePeerSelector, dcbFcoePeerIdentifier, dcbFcoePeerWilling, dcbFcoePeerVersion, dcbFcoePeerMaxVersion, dcbFcoePeerError, dcbFcoePeerData, dcbFcoeOperStatusChgTrapEnable, dcbFcoeSubType, dcbFcoeOperData, dcbFcoeOperSyncd, dcbFcoeOperMode, dcbFcoeOperError, dcbFcoeOperMaxVersion, dcbFcoeOperVersion, dcbFcoeOperSelector, dcbFcoeOperIdentifier } STATUS current DESCRIPTION "A collection for Dcb FCOE Group" ::= { dcbFcoeGroups 1 } dcbMiscGroup OBJECT-GROUP OBJECTS { dcbConfigEnable, dcbVersion, dcbOperVersion, dcbOsControlledEnable } STATUS current DESCRIPTION "A collection for Dcb Misc Group" ::= { dcbMiscGroups 1 } dcbNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { dcbiScsiOperStatusChangedTrap, dcbPgOperStatusChangedTrap, dcbPfcOperStatusChangedTrap, dcbFcoeOperStatusChangedTrap } STATUS current DESCRIPTION "A collection of notification for Dcb Group" ::= { dcbNotificationGroups 1 } -- Compliance statement end END SNMP/MIB/INTELLAN.mib0000755000000000000000000012633012453213337011042 0ustar -- /***************************************************************************** -- ** INTEL CONFIDENTIAL ** -- ** ** -- ** Copyright 1998 2011 Intel Corporation All Rights Reserved. ** -- ** ** -- ** The source code contained or described herein and all documents related ** -- ** to the source code ("Material") are owned by Intel Corporation or its ** -- ** suppliers or licensors. Title to the Material remains with Intel ** -- ** Corporation or its suppliers and licensors. The Material contains trade ** -- ** secrets and proprietary and confidential information of Intel or its ** -- ** suppliers and licensors. The Material is protected by worldwide ** -- ** copyright and trade secret laws and treaty provisions. No part of the ** -- ** Material may be used, copied, reproduced, modified, published, ** -- ** uploaded, posted, transmitted, distributed, or disclosed in any way ** -- ** without Intel’s prior express written permission. ** -- ** ** -- ** No license under any patent, copyright, trade secret or other ** -- ** intellectual property right is granted to or conferred upon you by ** -- ** disclosure or delivery of the Materials, either expressly, by ** -- ** implication, inducement, estoppel or otherwise. Any license under such ** -- ** intellectual property rights must be express and approved by Intel in ** -- ** writing. ** -- *****************************************************************************/ INTEL-LAN-ADAPTERS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32, Gauge32, enterprises FROM SNMPv2-SMI TEXTUAL-CONVENTION, PhysAddress, DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ; intellan MODULE-IDENTITY LAST-UPDATED "201210310000Z" -- Oct, 31, 2012 ORGANIZATION "Intel Corp" CONTACT-INFO "Intel Corp http://www.intel.com/" DESCRIPTION "The MIB module for Intel LAN SNMP agent." REVISION "201210310000Z" -- Oct 31, 2012 DESCRIPTION "Version 1.4.10 Removed the extra 1 after enterprises ID" ::= { enterprises 3183 } --iso OBJECT IDENTIFIER ::= { 1 } --org OBJECT IDENTIFIER ::= { iso 3 } --dod OBJECT IDENTIFIER ::= { org 6 } --internet OBJECT IDENTIFIER ::= { dod 1 } --directory OBJECT IDENTIFIER ::= { internet 1 } --mgmt OBJECT IDENTIFIER ::= { internet 2 } --experimental OBJECT IDENTIFIER ::= { internet 3 } --private OBJECT IDENTIFIER ::= { internet 4 } --enterprises OBJECT IDENTIFIER ::= { private 1 } intel OBJECT IDENTIFIER ::= { enterprises 343 } products OBJECT IDENTIFIER ::= { intel 2 } nic-products OBJECT IDENTIFIER ::= { products 7 } intel-lan-adapters OBJECT IDENTIFIER ::= { nic-products 2 } component-description OBJECT IDENTIFIER ::= { intel-lan-adapters 1 } InterfaceIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." SYNTAX Integer32 (1..2147483647) company OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Company that provided this MIB - Intel(R) Corporation." ::= { component-description 1 } description OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Description of this component - Intel(R) Network Adapter(s), Advanced Management." ::= { component-description 2 } operatingSystem OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Operating System of the server on which the SNMP agent is executed." ::= { component-description 3 } mibVersion1-4-3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of this MIB - the empty string is always returned." ::= { component-description 4 } mibVersionSupported OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the MIB supported by the agent. 1.x.y indicates that every MIB version of that template is supported by the agent." ::= { component-description 5 } agentExtensionVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the SNMP extension agent." ::= { component-description 6 } status OBJECT-TYPE SYNTAX INTEGER { baseDriverNotLoadedAnsNotLoaded(0), baseDriverLoadedAnsNotLoaded(1), baseDriverNotLoadedAnsLoaded(2), baseDriverLoadedAnsLoaded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates status and functionality of the adapter(s) - whether the base driver and ANS are loaded." ::= { component-description 7 } adaptersTables OBJECT IDENTIFIER ::= { intel-lan-adapters 2 } -- ****************************** -- Generic Adapter Attr Table -- ****************************** genericAdaptersAttrTables OBJECT IDENTIFIER ::= { adaptersTables 1 } genericAdaptersAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF GenericAdapterAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all kinds of adapters." ::= { genericAdaptersAttrTables 1 } genericAdapterAttrEntry OBJECT-TYPE SYNTAX GenericAdapterAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all kinds of adapters. There is one 'entry' for each physical or virtual adapter." INDEX { adapterIndex } ::= { genericAdaptersAttrTable 1 } GenericAdapterAttrEntry ::= SEQUENCE { adapterIndex InterfaceIndex, adapterName DisplayString, adapterType INTEGER, adapterDriverLoadStatus INTEGER } adapterIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than or equal to zero, for each interface." ::= { genericAdapterAttrEntry 1 } adapterName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the adapter interface. There is a unique name for each instance." ::= { genericAdapterAttrEntry 2 } adapterType OBJECT-TYPE SYNTAX INTEGER { standAlone(0), teamMember(1), virtual(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of adapter (member, stand-alone, or virtual)." ::= { genericAdapterAttrEntry 3 } adapterDriverLoadStatus OBJECT-TYPE SYNTAX INTEGER { loaded(0), notLoaded(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Load status of the driver: -'loaded' if the driver is loaded on the NIC; 'notLoaded' otherwise. A status of 'notLoaded' means that the NIC is missing (via 'hotRemove') or the driver is not fully loaded for some reason." ::= { genericAdapterAttrEntry 4 } genericAdaptersDriversAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF GenericAdapterDriverAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all kinds of adapter drivers." ::= { genericAdaptersAttrTables 2 } genericAdapterDriverAttrEntry OBJECT-TYPE SYNTAX GenericAdapterDriverAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all kinds of adapter drivers. There is one 'entry' for each adapter driver" INDEX { adapterIndex } ::= { genericAdaptersDriversAttrTable 1 } GenericAdapterDriverAttrEntry ::= SEQUENCE { adapterDriverName DisplayString, adapterDriverInfo DisplayString, adapterDriverVersion DisplayString, adapterDriverPath DisplayString, adapterDriverDate DisplayString, adapterDriverSize DisplayString, adapterIpAddress DisplayString } adapterDriverName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the adapter driver." ::= { genericAdapterDriverAttrEntry 1 } adapterDriverInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Additional information about the adapter. Includes name of the NIC." ::= { genericAdapterDriverAttrEntry 2 } adapterDriverVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Adapter driver version number." ::= { genericAdapterDriverAttrEntry 3 } adapterDriverPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Adapter driver path name." ::= { genericAdapterDriverAttrEntry 4 } adapterDriverDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Adapter driver creation date (in mm/dd/yy format)." ::= { genericAdapterDriverAttrEntry 5 } adapterDriverSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Adapter driver file size." ::= { genericAdapterDriverAttrEntry 6 } -- ***************************************************************** -- Generic Adapter IP address -- ***************************************************************** adapterIpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Adapter IP address" ::= { genericAdapterDriverAttrEntry 7 } genericAdaptersTrafficStatsAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF GenericAdapterTrafficStatsAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic stats common to all kinds of adapters." ::= { genericAdaptersAttrTables 3 } genericAdapterTrafficStatsAttrEntry OBJECT-TYPE SYNTAX GenericAdapterTrafficStatsAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic stats common to all kinds of adapters. There is one 'entry' for each adapter instance." INDEX { adapterIndex } ::= { genericAdaptersTrafficStatsAttrTable 1 } GenericAdapterTrafficStatsAttrEntry ::= SEQUENCE { adapterRxPackets Counter32, adapterTxPackets Counter32, adapterRxBytes Counter32, adapterTxBytes Counter32, adapterRxErrors Counter32, adapterTxErrors Counter32, adapterRxDropped Counter32, adapterTxDropped Counter32, adapterRxMulticast Counter32, adapterCollisions Counter32 } adapterRxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received." ::= { genericAdapterTrafficStatsAttrEntry 1 } adapterTxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets transmitted." ::= { genericAdapterTrafficStatsAttrEntry 2 } adapterRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes received." ::= { genericAdapterTrafficStatsAttrEntry 3 } adapterTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes transmitted." ::= { genericAdapterTrafficStatsAttrEntry 4 } adapterRxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received with errors (packets that failed to reach the protocol)." ::= { genericAdapterTrafficStatsAttrEntry 5 } adapterTxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets that failed to transmit." ::= { genericAdapterTrafficStatsAttrEntry 6 } adapterRxDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of receive packets dropped due to overrun." ::= { genericAdapterTrafficStatsAttrEntry 7 } adapterTxDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transmit packets dropped due to successive collisions." ::= { genericAdapterTrafficStatsAttrEntry 8 } adapterRxMulticast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Multicast packets received." ::= { genericAdapterTrafficStatsAttrEntry 9 } adapterCollisions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of single collisions." ::= { genericAdapterTrafficStatsAttrEntry 10 } -- ******************************* -- Physical Adapter Attr Table -- ******************************* physicalAdaptersAttrTables OBJECT IDENTIFIER ::= { adaptersTables 2 } physicalAdaptersAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF PhysicalAdapterAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all Physical Adapters." ::= { physicalAdaptersAttrTables 1 } physicalAdapterAttrEntry OBJECT-TYPE SYNTAX PhysicalAdapterAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all Physical Adapters. There is one 'entry' for each standalone or member adapter." INDEX { physicalAdapterIndex } ::= { physicalAdaptersAttrTable 1 } PhysicalAdapterAttrEntry ::= SEQUENCE { physicalAdapterIndex InterfaceIndex, physicalAdapterLinkStatus INTEGER, physicalAdapterLinkStatusChangesCounter Counter32, physicalAdapterSpeed Gauge32, physicalAdapterDplxMode INTEGER, physicalAdapterAutoNegotiation INTEGER, physicalAdapterPciBus Integer32, physicalAdapterPciSlot Integer32, physicalAdapterIrq Integer32, physicalAdapterCurrentNA PhysAddress, physicalAdapterPermanentNA PhysAddress, physicalAdapterOnlineDiagStatus INTEGER, physicalAdapterExpressTeamed INTEGER, physicalAdapterExpressTeamBundleId Integer32 } physicalAdapterIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than or equal to zero, for each interface." ::= { physicalAdapterAttrEntry 1 } physicalAdapterLinkStatus OBJECT-TYPE SYNTAX INTEGER { not-available(-1), link-up(0), link-down(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Physical adapter link status. Appears only if available - that is, only if the driver is compliant with SNMP; otherwise, NO_SUCH_NAME is returned." ::= { physicalAdapterAttrEntry 2 } physicalAdapterLinkStatusChangesCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of changes in physical adapter link status. Any change ('up-to-down' or 'down- to-up') is counted. This value can be reset (to zero) by the user; no other value is permitted. This value appears only if it is available - that is, only if the driver is compliant with SNMP; otherwise, NO_SUCH_NAME is returned." ::= { physicalAdapterAttrEntry 3 } physicalAdapterSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Physical adapter speed (in Mbps). Appears only for an SNMP-compliant adapter with link up." ::= { physicalAdapterAttrEntry 4 } physicalAdapterDplxMode OBJECT-TYPE SYNTAX INTEGER { not-available(0), half(1), full(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Physical Adapter Duplex Mode. Appears only for an SNMP-compliant adapter with link up." ::= { physicalAdapterAttrEntry 5 } physicalAdapterAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Physical adapter autonegotiation mode. This value appears only if it is available - that is, only if the driver is compliant with SNMP; otherwise, NO_SUCH_NAME is returned." ::= { physicalAdapterAttrEntry 6 } physicalAdapterPciBus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Physical adapter PCI bus number." ::= { physicalAdapterAttrEntry 7 } physicalAdapterPciSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Physical adapter PCI slot number." ::= { physicalAdapterAttrEntry 8 } physicalAdapterIrq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Physical adapter Interrupt Request number." ::= { physicalAdapterAttrEntry 9 } physicalAdapterCurrentNA OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Current MAC address of the physical adapter(in hex notation)." ::= { physicalAdapterAttrEntry 10 } physicalAdapterPermanentNA OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Permanent MAC address of the physical adapter(in hex notation)." ::= { physicalAdapterAttrEntry 11 } physicalAdapterOnlineDiagStatus OBJECT-TYPE SYNTAX INTEGER { not-available(-1), failed(0), passed(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Online Diagnostics Status of the Physical Adapter. Online Diagnostics consist of Link Test and other Hardware Tests." ::= { physicalAdapterAttrEntry 12 } physicalAdapterExpressTeamed OBJECT-TYPE SYNTAX INTEGER { not-available(0), primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Physical Adapter Express team status. Appears only for an adapter with express teaming capability." ::= { physicalAdapterAttrEntry 13 } physicalAdapterExpressTeamBundleId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique value to identify the express team in the system." ::= { physicalAdapterAttrEntry 14 } physicalAdaptersAttrOffloadTable OBJECT-TYPE SYNTAX SEQUENCE OF PhysicalAdapterAttrOffloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes of offloading-enabled physical adapters. There is one 'entry' for each SNMP-compliant physical adapter." ::= { physicalAdaptersAttrTables 2 } physicalAdapterAttrOffloadEntry OBJECT-TYPE SYNTAX PhysicalAdapterAttrOffloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes of offloading-enabled physical adapters. There is one 'entry' for each SNMP-compliant physical adapter." INDEX { physicalAdapterIndex } ::= { physicalAdaptersAttrOffloadTable 1 } PhysicalAdapterAttrOffloadEntry ::= SEQUENCE { physicalAdapterTcpRxChecksumOffLoadEnable INTEGER, physicalAdapterTcpRxChecksumBad Counter32, physicalAdapterTcpTxChecksumOffLoadEnable INTEGER, physicalAdapterIpv4RxChecksumOffLoadEnable INTEGER, physicalAdapterIpv4TxChecksumOffLoadEnable INTEGER, physicalAdapterIpv4TCPSegmentationOffLoadEnable INTEGER } physicalAdapterTcpRxChecksumOffLoadEnable OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "When enabled, TCP for 'receive' checksums are performed in hardware." ::= { physicalAdapterAttrOffloadEntry 1 } physicalAdapterTcpRxChecksumBad OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bad 'receive' checksums." ::= { physicalAdapterAttrOffloadEntry 2 } physicalAdapterTcpTxChecksumOffLoadEnable OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "When enabled, TCP for 'transmit' checksums are performed in hardware." ::= { physicalAdapterAttrOffloadEntry 3 } physicalAdapterIpv4RxChecksumOffLoadEnable OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "When enabled, IPv4 for 'receive' checksums are performed in hardware." ::= { physicalAdapterAttrOffloadEntry 4 } physicalAdapterIpv4TxChecksumOffLoadEnable OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "When enabled, IPv4 for 'receive' checksums are performed in hardware." ::= { physicalAdapterAttrOffloadEntry 5 } physicalAdapterIpv4TCPSegmentationOffLoadEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "When enabled, TCP Segmentation is performed in hardware." ::= { physicalAdapterAttrOffloadEntry 6 } -- ************************************ -- Virtual Adapter Attr Tables -- ************************************ virtualAdaptersAttrTables OBJECT IDENTIFIER ::= { adaptersTables 3 } virtualAdaptersAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF VirtualAdapterAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all iANS-virtual adapters." ::= { virtualAdaptersAttrTables 1 } virtualAdapterAttrEntry OBJECT-TYPE SYNTAX VirtualAdapterAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all iANS-virtual adapters. There is one 'entry' for each virtual adapter" INDEX { virtualAdapterIndex } ::= { virtualAdaptersAttrTable 1 } VirtualAdapterAttrEntry ::= SEQUENCE { virtualAdapterIndex InterfaceIndex, virtualAdapterAnsId Integer32 } virtualAdapterIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than or equal to zero, for each interface." ::= { virtualAdapterAttrEntry 1 } virtualAdapterAnsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID of the team to which the adapter belongs." ::= { virtualAdapterAttrEntry 2 } virtualAdaptersVlanAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF VirtualAdapterVlanAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all iANS-virtual adapters VLANs." ::= { virtualAdaptersAttrTables 2 } virtualAdapterVlanAttrEntry OBJECT-TYPE SYNTAX VirtualAdapterVlanAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN attributes.Appears for virtual adapters that support VLANs only. There is one 'entry' for each VLAN." INDEX { virtualAdapterIndex } ::= { virtualAdaptersVlanAttrTable 1 } VirtualAdapterVlanAttrEntry ::= SEQUENCE { virtualAdapterVlanId INTEGER } virtualAdapterVlanId OBJECT-TYPE SYNTAX INTEGER { none(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "ID for this virtual adapter VLAN." ::= { virtualAdapterVlanAttrEntry 1 } -- ******************** -- Ans Attr Tables -- ******************** ansAttrTables OBJECT IDENTIFIER ::= { adaptersTables 4 } ansAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF AnsAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ANS attributes." ::= { ansAttrTables 1 } ansAttrEntry OBJECT-TYPE SYNTAX AnsAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ANS attributes. There is one 'entry' for each team" INDEX { ansId } ::= { ansAttrTable 1 } AnsAttrEntry ::= SEQUENCE { ansId Integer32, ansNumberOfMembers Integer32, ansNumberOfVirtualAdapters Integer32 } ansId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ANS ID. A unique value." ::= { ansAttrEntry 1 } ansNumberOfMembers OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of member adapters in the team." ::= { ansAttrEntry 2 } ansNumberOfVirtualAdapters OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of virtual adapters in the team." ::= { ansAttrEntry 3 } ansVlansAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF AnsVlanAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ANS attributes." ::= { ansAttrTables 2 } ansVlanAttrEntry OBJECT-TYPE SYNTAX AnsVlanAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ANS VLAN attributes. Appears only if VLAN is active. There is one 'entry' for each Vlan." INDEX { ansId } ::= { ansVlansAttrTable 1 } AnsVlanAttrEntry ::= SEQUENCE { ansVlanTaggingType INTEGER } ansVlanTaggingType OBJECT-TYPE SYNTAX INTEGER { none(0), tag-802-1Q(1), tag-802-1P(2), tag-802-3AC(3), tag-iSL(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Tagging type of the VLAN adapter." ::= { ansVlanAttrEntry 1 } ansTeamsAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF AnsTeamAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ANS team attributes." ::= { ansAttrTables 3 } ansTeamAttrEntry OBJECT-TYPE SYNTAX AnsTeamAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ANS team attributes. Appears only when adapter teaming exist. There is one 'entry' for each team." INDEX { ansId } ::= { ansTeamsAttrTable 1 } AnsTeamAttrEntry ::= SEQUENCE { ansTeamName DisplayString, ansTeamMode INTEGER, ansTeamLinkState INTEGER, ansTeamSpeed Gauge32, ansTeamProbesState INTEGER, ansTeamProbesMode INTEGER, ansTeamLoadBalanceRefresh INTEGER, ansTeamProbesSendTime INTEGER, ansTeamPreferredPrimaryIndex INTEGER, ansTeamCurrentPrimaryIndex INTEGER, ansTeamPreviousPrimaryIndex INTEGER, ansTeamFailoverCounter Counter32, ansTeamSlaCompatible INTEGER, ansTeamAggrSelectionMode INTEGER, ansTeamRlbSupport INTEGER } ansTeamName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Unique ANS team name" ::= { ansTeamAttrEntry 1 } ansTeamMode OBJECT-TYPE SYNTAX INTEGER { adapter-fault-tolerance(0), adaptive-load-balancing(1), static-link-aggregation(2), iEEE-802-3ad(4), switch-fault-tolerance(5), none(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Team mode." ::= { ansTeamAttrEntry 2 } ansTeamLinkState OBJECT-TYPE SYNTAX INTEGER { up(0), down(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Team link state. Aggregation of the link state of all team members ( 0 = some up)." ::= { ansTeamAttrEntry 3 } ansTeamSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Team speed.Speed of the current primary member (in Mbps)." ::= { ansTeamAttrEntry 4 } ansTeamProbesState OBJECT-TYPE SYNTAX INTEGER { probes-enabled(0), probes-disabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "If enabled, the ANS uses probes to check on its members." ::= { ansTeamAttrEntry 5 } ansTeamProbesMode OBJECT-TYPE SYNTAX INTEGER { broadcast(0), multicast(1), not-available(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Mode of probe usage." ::= { ansTeamAttrEntry 6 } ansTeamLoadBalanceRefresh OBJECT-TYPE SYNTAX INTEGER { not-available(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "In seconds. If available, the number of seconds that passes before the software resets or refreshes the current load across team members." ::= { ansTeamAttrEntry 7 } ansTeamProbesSendTime OBJECT-TYPE SYNTAX INTEGER { not-available(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "In seconds. If available, the interval in seconds during which probe packets are sent." ::= { ansTeamAttrEntry 8 } ansTeamPreferredPrimaryIndex OBJECT-TYPE SYNTAX INTEGER { not-available(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the preferred primary member adapter. " ::= { ansTeamAttrEntry 9 } ansTeamCurrentPrimaryIndex OBJECT-TYPE SYNTAX INTEGER { not-available(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the current primary member adapter." ::= { ansTeamAttrEntry 10 } ansTeamPreviousPrimaryIndex OBJECT-TYPE SYNTAX INTEGER { not-available(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the previous primary member adapter." ::= { ansTeamAttrEntry 11 } ansTeamFailoverCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failover counter - that is, the number of failovers the team suffered. This value can be reset by the user - that is, it can be set to zero only; no other value is permitted." ::= { ansTeamAttrEntry 12 } ansTeamSlaCompatible OBJECT-TYPE SYNTAX INTEGER { not-available(-1), yes(0), no(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates compatibility with Static Link Aggregation mode when in IEEE 802.3AD mode." ::= { ansTeamAttrEntry 13 } ansTeamAggrSelectionMode OBJECT-TYPE SYNTAX INTEGER { not-available(-1), bandwidth(0), count(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates aggregation selection mode when in IEEE 802.3AD mode." ::= { ansTeamAttrEntry 14 } ansTeamRlbSupport OBJECT-TYPE SYNTAX INTEGER { not-available(-1), enabled(0), disabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether 'receive load balancing support' is enabled when in AdaptiveLoadBalancing teaming mode. (If disabled, only the transmission is balanced.)" ::= { ansTeamAttrEntry 15 } -- *********************************** -- Ans Member Attr Tables -- *********************************** ansMembersAttrTables OBJECT IDENTIFIER ::= { adaptersTables 5 } ansMembersAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF AnsMemberAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all iANS-TeamMember Adapters." ::= { ansMembersAttrTables 1 } ansMemberAttrEntry OBJECT-TYPE SYNTAX AnsMemberAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all iANS-TeamMember Adapters. There is one 'entry' for each team member adapter." INDEX { ansMemberIndex } ::= { ansMembersAttrTable 1 } AnsMemberAttrEntry ::= SEQUENCE { ansMemberIndex InterfaceIndex, ansMemberAnsId Integer32 } ansMemberIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each member. The value is non-negative and identical to the value of the physical adapter associated with this member." ::= { ansMemberAttrEntry 1 } ansMemberAnsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID of the ANS to which the Adapter belongs." ::= { ansMemberAttrEntry 2 } ansTeamMembersAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF AnsTeamMemberAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes common to all iANS-TeamMember Adapters." ::= { ansMembersAttrTables 2 } ansTeamMemberAttrEntry OBJECT-TYPE SYNTAX AnsTeamMemberAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes of iANS-TeamMember Adapters related to adapter teaming. Appears only if adapter teaming exists." INDEX { ansMemberIndex } ::= { ansTeamMembersAttrTable 1 } AnsTeamMemberAttrEntry ::= SEQUENCE { ansTeamMemberState INTEGER, ansTeamMemberFailureCounter Counter32, ansTeamMemberPriority INTEGER } ansTeamMemberState OBJECT-TYPE SYNTAX INTEGER { active(0), disabled(1), standby(2), active-secondary(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "iANS-TeamMember adapter state." ::= { ansTeamMemberAttrEntry 1 } ansTeamMemberFailureCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failure counter - that is, the number of failovers from this member. This value can be reset by the user - that is, it can be set to zero only; no other value is permitted." ::= { ansTeamMemberAttrEntry 2 } ansTeamMemberPriority OBJECT-TYPE SYNTAX INTEGER { none(0), primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Priority of the team member." ::= {ansTeamMemberAttrEntry 3 } -- ****** -- events -- ****** events OBJECT IDENTIFIER ::= { intel-lan-adapters 3 } -- ********************** -- physicalAdapter Events -- ********************** physicalAdaptersEvents OBJECT IDENTIFIER ::= { events 1 } physicalAdaptersTraps OBJECT IDENTIFIER ::= { physicalAdaptersEvents 1 } physicalAdapterLinkUpTrap NOTIFICATION-TYPE OBJECTS { physicalAdapterIndex } STATUS current DESCRIPTION "Adapter has reached a linkup state." ::= { physicalAdaptersTraps 1 } physicalAdapterLinkDownTrap NOTIFICATION-TYPE OBJECTS { physicalAdapterIndex } STATUS current DESCRIPTION "Adapter has reached a link down state." ::= { physicalAdaptersTraps 2 } physicalAdapterAddedTrap NOTIFICATION-TYPE OBJECTS { physicalAdapterIndex } STATUS current DESCRIPTION "Adapter has been installed." ::= { physicalAdaptersTraps 3 } physicalAdapterRemovedTrap NOTIFICATION-TYPE OBJECTS { physicalAdapterIndex } STATUS current DESCRIPTION "Adapter has been uninstalled." ::= { physicalAdaptersTraps 4 } physicalAdapterOnlineDiagPassedTrap NOTIFICATION-TYPE OBJECTS { physicalAdapterIndex } STATUS current DESCRIPTION "Adapter's online diagnostics passed." ::= { physicalAdaptersTraps 5 } physicalAdapterOnlineDiagFailedTrap NOTIFICATION-TYPE OBJECTS { physicalAdapterIndex } STATUS current DESCRIPTION "Adapter's online diagnostics failed. Online diagnostics might fail because of link loss or other hardware issues." ::= { physicalAdaptersTraps 6 } physicalAdapterLinkUpDownTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether a physical adapter's link up and link down traps are enabled. The user can set this value." ::= { physicalAdaptersEvents 2 } physicalAdapterAddedRemovedTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether a physical adapter's 'added' and 'removed' traps are enabled. The user can set this value." ::= { physicalAdaptersEvents 3 } physicalAdapterOnlineDiagPassedFailedTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether physicalAdapterOnlineDiag 'passed' and 'failed' are enabled." ::= { physicalAdaptersEvents 4 } -- ******************* -- Virtual Adapter Events -- ******************* virtualAdaptersEvents OBJECT IDENTIFIER ::= { events 2 } virtualAdaptersTraps OBJECT IDENTIFIER ::= { virtualAdaptersEvents 1 } virtualAdapterAddedTrap NOTIFICATION-TYPE OBJECTS { virtualAdapterIndex, ansId } STATUS current DESCRIPTION "Virtual adapter has been added to a team." ::= { virtualAdaptersTraps 1 } virtualAdapterRemovedTrap NOTIFICATION-TYPE OBJECTS { virtualAdapterIndex } STATUS current DESCRIPTION "Virtual adapter has been removed from a team." ::= { virtualAdaptersTraps 2 } virtualAdaptersTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether virtual adapter traps are enabled. The user can set this value." ::= { virtualAdaptersEvents 2 } -- ******************* -- team Events -- ******************* ansEvents OBJECT IDENTIFIER ::= { events 3 } ansTraps OBJECT IDENTIFIER ::= { ansEvents 1 } ansTeamFailoverTrap NOTIFICATION-TYPE OBJECTS { ansId, ansTeamCurrentPrimaryIndex, ansTeamPreviousPrimaryIndex } STATUS current DESCRIPTION "The primary team member has been changed." ::= { ansTraps 1 } ansAddedTrap NOTIFICATION-TYPE OBJECTS { ansId } STATUS current DESCRIPTION "Team has been added." ::= { ansTraps 2 } ansRemovedTrap NOTIFICATION-TYPE OBJECTS { ansId } STATUS current DESCRIPTION "Team has been removed." ::= { ansTraps 3 } ansTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether team traps are enabled. The user can set this value." ::= { ansEvents 2 } -- ******************* -- Team Member Events -- ******************* teamMembersEvents OBJECT IDENTIFIER ::= { events 4 } teamMembersTraps OBJECT IDENTIFIER ::= { teamMembersEvents 1 } teamMemberAddedTrap NOTIFICATION-TYPE OBJECTS { ansMemberIndex, ansId } STATUS current DESCRIPTION "Member has been added to a team." ::= { teamMembersTraps 1 } teamMemberRemovedTrap NOTIFICATION-TYPE OBJECTS { ansMemberIndex } STATUS current DESCRIPTION "Member has been removed from a team." ::= { teamMembersTraps 2 } teamMemberTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether traps for members are enabled. The user can set this value." ::= { teamMembersEvents 2 } -- -- Compliance Statements -- intellan-conformance OBJECT IDENTIFIER ::= { intellan 1 } phyAdapterGroups OBJECT IDENTIFIER ::= { intellan-conformance 1 } phyAdapterNotificationGroups OBJECT IDENTIFIER ::= { intellan-conformance 2 } miscGroups OBJECT IDENTIFIER ::= { intellan-conformance 3 } vtAdapterGroups OBJECT IDENTIFIER ::= { intellan-conformance 4 } vtAdapterNotificationGroups OBJECT IDENTIFIER ::= { intellan-conformance 5 } ansGroups OBJECT IDENTIFIER ::= { intellan-conformance 6 } ansNotificationGroups OBJECT IDENTIFIER ::= { intellan-conformance 7 } teamGroups OBJECT IDENTIFIER ::= { intellan-conformance 8 } teamNotificationGroups OBJECT IDENTIFIER ::= { intellan-conformance 9 } intellanCompliances OBJECT IDENTIFIER ::= { intellan-conformance 10 } intellan-compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statements for the Intel Lan Agent." MODULE -- this module MANDATORY-GROUPS { phyAdapterGroup, phyAdapterNotificationGroup, miscGroup, vtAdapterGroup, vtAdapterNotificationGroup } ::= { intellanCompliances 1 } phyAdapterGroup OBJECT-GROUP OBJECTS { physicalAdapterOnlineDiagPassedFailedTrapEnable, physicalAdapterAddedRemovedTrapEnable, physicalAdapterLinkUpDownTrapEnable, physicalAdapterIpv4TCPSegmentationOffLoadEnable, physicalAdapterIpv4TxChecksumOffLoadEnable, physicalAdapterIpv4RxChecksumOffLoadEnable, physicalAdapterTcpTxChecksumOffLoadEnable, physicalAdapterTcpRxChecksumBad, physicalAdapterTcpRxChecksumOffLoadEnable, physicalAdapterExpressTeamBundleId, physicalAdapterExpressTeamed, physicalAdapterOnlineDiagStatus, physicalAdapterPermanentNA, physicalAdapterCurrentNA, physicalAdapterIrq, physicalAdapterPciSlot, physicalAdapterPciBus, physicalAdapterAutoNegotiation, physicalAdapterDplxMode, physicalAdapterSpeed, physicalAdapterLinkStatusChangesCounter, physicalAdapterLinkStatus, physicalAdapterIndex, adapterCollisions, adapterRxMulticast, adapterTxDropped, adapterRxDropped, adapterTxErrors, adapterRxErrors, adapterTxBytes, adapterRxBytes, adapterTxPackets, adapterRxPackets, adapterIpAddress, adapterDriverSize, adapterDriverDate, adapterDriverPath, adapterDriverVersion, adapterDriverInfo, adapterDriverName, adapterDriverLoadStatus, adapterType, adapterName, adapterIndex } STATUS current DESCRIPTION "A collection of objects for phyiscal adapter group" ::= { phyAdapterGroups 1 } phyAdapterNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { physicalAdapterOnlineDiagFailedTrap, physicalAdapterOnlineDiagPassedTrap, physicalAdapterRemovedTrap, physicalAdapterAddedTrap, physicalAdapterLinkDownTrap, physicalAdapterLinkUpTrap } STATUS current DESCRIPTION "A collection of notification for physical adapter notification" ::= { phyAdapterNotificationGroups 1 } vtAdapterGroup OBJECT-GROUP OBJECTS { virtualAdaptersTrapEnable, virtualAdapterVlanId, virtualAdapterAnsId, virtualAdapterIndex } STATUS current DESCRIPTION "A collection of objects for virtual adapter group" ::= { vtAdapterGroups 1 } vtAdapterNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { virtualAdapterRemovedTrap, virtualAdapterAddedTrap } STATUS current DESCRIPTION "A collection of notification for virtual adapter notification" ::= { vtAdapterNotificationGroups 1 } ansGroup OBJECT-GROUP OBJECTS { ansId, ansNumberOfMembers, ansNumberOfVirtualAdapters, ansVlanTaggingType, ansTeamName, ansTeamMode, ansTeamLinkState, ansTeamSpeed, ansTeamProbesState, ansTeamProbesMode, ansTeamLoadBalanceRefresh, ansTeamProbesSendTime, ansTeamPreferredPrimaryIndex, ansTeamCurrentPrimaryIndex, ansTeamPreviousPrimaryIndex, ansTeamFailoverCounter, ansTeamSlaCompatible, ansTeamAggrSelectionMode, ansTeamRlbSupport, ansMemberIndex, ansMemberAnsId, ansTeamMemberState, ansTeamMemberFailureCounter, ansTeamMemberPriority, ansTrapEnable } STATUS current DESCRIPTION "A collection of objects for ans group" ::= { ansGroups 1 } ansNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { ansTeamFailoverTrap, ansAddedTrap, ansRemovedTrap } STATUS current DESCRIPTION "A collection of notification for ans notification" ::= { ansNotificationGroups 1 } teamGroup OBJECT-GROUP OBJECTS { teamMemberTrapEnable } STATUS current DESCRIPTION "A collection of objects for team group" ::= { teamGroups 1 } teamNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { teamMemberAddedTrap, teamMemberRemovedTrap } STATUS current DESCRIPTION "A collection of notification for team notification" ::= { teamNotificationGroups 1 } miscGroup OBJECT-GROUP OBJECTS { status, agentExtensionVersion, mibVersionSupported, mibVersion1-4-3, operatingSystem, description, company } STATUS current DESCRIPTION "A collection of objects for misc. group" ::= { miscGroups 1 } -- Compliance statement end END