Regulatory Compliance Statements

Safety Compliance

EMC Compliance

Regulatory Compliance Markings

When required these products are provided with the following Product Certification Markings:

FCC Class A User Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
CAUTION: If the device is changed or modified without permission from Intel, the user may void his or her authority to operate the equipment.

Canadian Compliance (Industry Canada)

CANADA ICES-003 CLASS A / CANADA NMB-003 CLASSE A

Manufacturer Declaration
European Community 

Manufacturer Declaration

Intel Corporation declares that the equipment described in this document is in conformance with the requirements of the European Council Directive listed below:

Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC

This product follows the provisions of the European Directive 1999/5/EC.

Dette produkt er i overensstemmelse med det europęiske direktiv 1999/5/EC.

Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC.

Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyksiä.

Ce produit est conforme aux exigences de la Directive Européenne 1999/5/EC.

Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 1999/5/EC.

Žessi vara stenst reglugerš Evrópska Efnahags Bandalagsins nśmer 1999/5/EC.

Questo prodotto č conforme alla Direttiva Europea 1999/5/EC.

Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.

Este produto cumpre com as normas da Diretiva Européia 1999/5/EC.

Este producto cumple con las normas del Directivo Europeo 1999/5/EC.

Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC.

This declaration is based upon compliance of the product to the following standards:

EN 55022:2006 +A1:2007 (CISPR 22 Class A) RF Emissions Control.
EN 55024:1998 +A1:2001 +A2:2003 (CISPR 24) Immunity to Electromagnetic Disturbance.
EN 60950-1:2006 +A11:2009 Information Technology Equipment- Safety-Part 1: General Requirements.

Intel Corporation
Mailstop JF3-446
5200 N.E. Elam Young Parkway
Hillsboro, Oregon  97124-6497

WARNING: This is a Class A product.  In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

VCCI Class A Statement

BSMI Class A Statement

China RoHS Declaration

KCC Notice Class A (Republic of Korea Only)

Class 1M Laser Product

These server adapters may contain laser devices for communication use. These devices are compliant with the requirements for Class 1 Laser Products and are safe in the intended use. In normal operation the output of these laser devices does not exceed the exposure limit of the eye and cannot cause harm.

For continued safe operation in case of an abnormal circumstance, always have the provided laser connector cover in place or a compatible fiber optics cable properly connected when power is available to the product.

The Laser device must be factory serviced ONLY by the responsible manufacturer! NO adjustments, service or maintenance is to be performed otherwise.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

These Class 1 Laser devices:

Comply with FDA/CDRH per CFR21, subchapter J.

Comply with EN60825-1:1994+A1+A2

End-of-Life / Product Recycling

Product recycling and end-of-life take-back systems and requirements vary by country.

Contact the retailer or distributor of this product for information about product recycling and/or take-back.


Last modified on 11/02/10 3:03p Revision