; AST VBIOS Release Notes ;=============================================================================== v.0.97.06: ycchen@030113 01.[New] Modify for Read EDID Stability (over sample) 02.[New] Support AST2300 + Sil164 (AST2300.DVO) - move AST2300 + ITE66121 support to AST2300.ITE v.0.97.05: ycchen@121212 01.[Bug] Remove Wide Screen Support in VBIOS currently v.0.97.04: ycchen@112512 01.[New] support vbios that display banner for 5sec 02.[New] Modify for ITE66121 support 03.[Bug] Fixed 800x600 16c mode display abnormal issue (v09700 issue) v.0.97.03: ycchen@111512 01.[Bug] fixed memory allocation failed issue for some DOS Tools v.0.97.02: ycchen@110112 01.[Bug] Modify DRAM Setting by H/W request 02.[Bug] Fixed ReadEDID cause system hanged with Avocent KVM v.0.97.01: ycchen@102912 01.[Bug] Fixed WHCK - PnP Stress Test not Stable Issue v.0.97.00: ycchen@102612 01.[New] [AST2300/2400] support AST2300/2400 + ITE66121 02.[Bug] Fixed WHCK PnP Stress Test Random Failed Issue 03.[New] Support WXGA modes in VBIOS, including 1280x800, 1440x900, 1680x1050, 1920x1080, 1366x768, 1600x900 04.[Bug] [AST2300/2400] Modify DRAM settings by H/W request --------------------------------------------------------------------------------- v.0.96.00: ycchen@081412 01.[New] [AST2400] Support AST2400 A0 02.[Bug] [AST2300] Modify DRAM settings for VBIOS coding bug 03.[New] [AST2300/2400] Set DAC source as VGA on POST 04.[New] Modify show logo time to 1sec --------------------------------------------------------------------------------- v.0.95.01: ycchen@052112 01.[Bug] Fixed iKVM cannot display properly if new VBIOS (v.0.92.00 and after) with older X Windows driver (before v.0.92.00) 02.[New] [AST2300] Modify DRAM settings by H/W request (2012_05_09) v.0.95.00: ycchen@120224 01.[New] Support AST2400 FPGA --------------------------------------------------------------------------------- v.0.94.03: ycchen@112311 01.[New] Enable MMIO access by default 02.[Bug] [Flash] Fixed update flash unstable issue on some platform. v.0.94.02: ycchen@102811 01.[New] [AST2300] Remove the patch for v.0.94.00 #2, Fixed in AMI CRB014 BIOS finally, ycchen@102811 v.0.94.01: ycchen@091611 01.[Bug] [AST2300] Fixed DRAM setting procedure issues v.0.94.00: ycchen@091311 01.[New] [AST2300] Modify DRAM Settings by H/W Request (07/06/11), ycchen@081011 02.[Bug] [AST2300] Fixed ASPM can't be disabled properly on some specific platform, ycchen@090911 03.[New] [Flash Utility] Modify for General SPI Flash Support --------------------------------------------------------------------------------- v.0.93.08: ycchen@053111 01.[New] [AST2300] Modify MCLK to 396MHz by H/W request, ycchen@053111 v.0.93.07: ycchen@050911 01.[Bug] Fixed it takes too long time to get EDID from EDID failed monitor 02.[New] Display Bannner include AST1300 v.0.93.04: ycchen@030211 01.[New] [AST2300] Modify for DDR3 2Gb Support 02.[Bug] Fixed Intel iSCSI cursor disappear issue, ycchen@030411 03.[New] [AST2300] Slow CPU/AHB clock in VGA only mode v.0.93.03: ycchen@021011 01.[New] [AST2300] Modify AST2300 DRAM Timing by H/W Request (020811) 02.[New] [AST2100/2150] Enable AST2100/2150 DRAM Calibration by H/W Request (021411) v.0.93.02: ycchen@122410 01.[Bug] Fixed INT10 far jmp ptr failed issue 02.[New] Support EFI + VBIOS in one expansion ROM, ycchen@122210 v.0.93.01: ycchen@121410 01.[New] [AST2300] Modify CRT Threshold by H/W Request, ycchen@121410 02.[New] [AST2300] Disable ASPM for VGA Only solution v.0.93.00: ycchen@121210 01.[New] Modify AST2300 DRAM Timing by H/W Request (121010) 02.[New] Add INT10 Far Call at the offset of 0x06 by DELL's request --------------------------------------------------------------------------------- v.0.92.02: ycchen@102010 01.[New] Set 800x600 default refresh rate to 60Hz 02.[Bug] Fixed wave form issue on 1280x1024 75Hz and 1280x800 60Hz 03.[New] [AST2300] DRAM type and size selection based on H/W trapping v.0.92.00: ycchen@080410 01.[New] Add More Mode Info to Scratch for General KVM Need 02.[New] Add for AST2300 VGA only solution 03.[New] Add for AST2300 A1 support 04.[New] Fixed display noise issue during linux kernel reboot (only fixed in AST2300) --------------------------------------------------------------------------------- v.0.91.0A: ycchen@062210 01.[Bug] Disable E2M for A0 chips issue v.0.91.09: ycchen@062110 01.[New] Support AST2300 Real chips 02.[New] Disable E2M Read for A0 chips issue v.0.91.07: ycchen@042110 01.[New] Modify display banner for AST2150/2200 v.0.91.06: ycchen@030410 01.[New] Show Framebuffer size while VBIOS POST v.0.91.05: ycchen@020310 01.[New] modify for AST2300 FPGA DDR2 & DDR3 support, ycchen@110609 02.[New] Disable PCI-E to M-Bus for AST2300, ycchen@012710 03.[New] Remove Virtual EDID support for other than AST2000, ycchen@020310 v.0.91.00: ycchen@011110 01.[New] Support AST2300 FPGA Board --------------------------------------------------------------------------------- v.0.90.07: ycchen@102109 01.[BUG] Fix DELL Diag failed issue, ycchen@102109 v.0.90.01: ycchen@082709 01.[Bug] Fixed have chance to get incorrect frame buffer base address if plug two ASPEED's Graphics, ycchen@072709 02.[New] Remove 8bpp VESA modes support above and equal than 1280x1024 due to backwidth issue 03.[New] Add DDR2 512Mx16 266MHz, 1Gx16 266 MHz support for AST2150 v.0.90.00: ycchen@071409 01.[New] remove AST1150 A0 PATCH --------------------------------------------------------------------------------- v.0.89.07: 01.[New] Modify DRAM timing by H/W request 02.[Bug] Fixed scrolling too slow in EGA mode, ycchen@050809 03.[Bug] Fixed SLES10.2 boot option wait too long issue, ycchen@051109 v.0.89.00: ycchen@121808 01.[New] Add DDR2 1Gx32.266 VBIOS Release for AST2100, ycchen@112608 02.[New] Add patch for AST1150, ycchen@121808 --------------------------------------------------------------------------------- v.0.88.04: ycchen@101408 01.[New] Add AST2100 DVO Support, ycchen@100808 02.[Bug] Fixed code error in SetWriteBank & SetReadBank, ycchen@101408 03.[New] Modify DRAM Reg. Settings by H/W Request, ycchen@102808 v.0.88.03: ycchen@100208 01.[Bug] Fix DELL RBU cause display blank issue, ycchen@100208 02.[New] Modify for the request of recovery BIOS by QCI 03.[Bug] Modify AST2100 DRAM timing for unstable issue (restore to v.0.88.01) v.0.88.02: ycchen@090908 01.[New] Bump Version for AST1160 v.0.88.01: ycchen@090208 01.[New] Add AST1100/2050/2100 A2 Chip Identity, ycchen@090108 02.[New] Modify AST1100/2050/2100 DDR2 DRAM Timing by Jason's Request v.0.88.00: ycchen@082808 01.[BUG] Fixed VGA2 Mirror Display on board solution can't work properly in Windows, ycchen@082708 --------------------------------------------------------------------------------- v.0.87.00: ycchen@072908 01.[PATCH] Patch for AST2100/1100 A2 X-Window Compatible Issue, ycchen@072908 --------------------------------------------------------------------------------- v.0.86.09: ycchen@051208 01.[New] Add DDR2 1Gx16 200MHz support v.0.86.04: ycchen@032108 01.[Bug] Fixed the background color of edit is incorrect after run cls, ycchen@032108 v.0.86.00: ycchen@012808 01.[New] Modify DRAM settings by H/W (01108) --------------------------------------------------------------------------------- v.0.85.03: ycchen@010308 01.[New] Modify for DDR 512x16 200MHz settings v.0.85.02: ycchen@121207 01.[Bug] Fixed DCT/SVGA/INT10 failed issue 02.[New] Modify DDR 512x16 200MHz parameters by H/W request v.0.85.01: ycchen@112707 01.[New] Modify DRAM timing by H/W request (11/08/07) 02.[Bug] Fixed display abnormal while new PLL modes change to standard modes, ycchen@112807 03.[New] Remove 1920x1200 for AST1100 04.[New] Modify Display banner for AST1100/2050/2100 05.[Bug] Change 1920x1200x60Hz's polarity to NP v.0.85.00: ycchen@103107 01.[New] Modify 1920x1200x60Hz to reduced blank mode, ycchen@081307 02.[New] Support ECC 03.[Bug] Fixed PCCheck VGA Palette Test Failed Issue, ycchen@103107 04.[Bug] Fixed Scanline info incorrect in scratch, ycchen@103107 05.[Patch] Patch WDT can't detect mode change properly, ycchen@103107 06.[New] Set Scratch after DRAM Initial 07.[New] Enable Read Cache for AST2100 A1 --------------------------------------------------------------------------------- v.0.84.05: ycchen@072607 01.[New] Disable ReadCache for AST2100 by H/W request 02.[New] Set VGA DRAM Trapping to DRAM Controller, ycchen@072607 v.0.84.04: ycchen@070907 01.[New] Modify DRAM timing for H/W request v.0.84.03: ycchen@062107 01.[New] Modify DRAM timing to 266MHz v.0.84.02: ycchen@061507 01.[Bug] Fixed 1920x1200x60Hz can't display 02.[New] Modify DRAM timing by H/W request v.0.84.01: ycchen@060807 01.[New] Remove Chrontel Setting for real chip 02.[New] Use 512Mb x32 setting as default DRAM type v.0.84.00: ycchen@060507 01.[New] Support AST2100 A0, ycchen@053107 02.[New] Support 1920x1200x60Hz for AST2100, ycchen@060407 --------------------------------------------------------------------------------- v.0.83.04: ycchen@051507 001.[Bug] Fixed bug check 0xf7 in vista64 v.0.83.03: ycchen@021607 001.[Bug] Fix AST2100 VGA & Video Threshold Issue, ycchen@02160 v.0.83.02: ycchen@020607 001.[Bug] Fix CMDQ & MMIO CMD reorder issue v.0.83.01: ycchen@011207 001.[New] Modify for AST2100 New IP (0606) 002.[Bug] Fix BCMDiag video memory test failed, ycchen@011206 v.0.83.00: ycchen@120406 001.[New] Support AST2100 FPGA EVB Board --------------------------------------------------------------------------------- v.0.82.00b: ycchen@092906 001.[New] Initial VGA only if Class Code is VGA Device, ycchen@091506 002.[New] Add the support for VGA initial SOC RTC 003.[New] Add scratch for scan line infor, ycchen@092906 v.0.82.00: ycchen@061406 001. Bump Version Only --------------------------------------------------------------------------------- v.0.81.01: ycchen@051106 001.[Bug] Fixed save/restore PLL setting incorrect by ycchen@051106 v.0.81.00: ycchen@042406 001.[New] Set MCLK166 as default, ycchen@042406 --------------------------------------------------------------------------------- v.0.80.00: ycchen@031306 001.[BUG] Fixed PCDR/AMIDIAG/BCMDIAG RAMDAC Test too long issue, ycchen@030606 002.[PATCH] Fixed ARC1220 RAID controller display message abnormal issue, ycchen@031006 --------------------------------------------------------------------------------- v.0.63.00: ycchen@020906 001. [Bug] Run PCDR/Video memory test cause KVM crash --------------------------------------------------------------------------------- v.0.62.00: ycchen@020606 001. [Patch] QCI LCD Monitor display dummy under the bottom of the screen --------------------------------------------------------------------------------- v.0.61.00: ycchen@011106 001.[Bug] fixed VRS/VRE incorrect issue, ycchen@122805 002.[New] 32k VBIOS as default 003.[New] Modify for product description 004.[New] Support 16/32 DRAM in one VBIOS 005.[Bug] Can't Set VESA Mode: 1280x1024x32bpp, ycchen@010606 006.[Bug] 640x480x72Hz Border issue 007.[Bug] Modify for low-reslution timing, ycchen@011005 008.[Bug] fixed AMIDIAG\VESA memory test failed issue, ycchen@011206 009.[Bug] Modify for CRTC timing for STD. mods, ycchen@011206 --------------------------------------------------------------------------------- v.0.60.00: ycchen@12202005, first release for A1 001.[New] Modify for A1 support 002.[New] Integrate LFB/UMA VBIOS into one (ASTVBIOS.ROM) --------------------------------------------------------------------------------- v.0.52.00: ycchen@11042005 1. [New] Change Device to 0x1A03 --------------------------------------------------------------------------------- v.0.51.00: ycchen@10252005 1. [Bug] Fixed ReadHat9 Install Shell Display Abnormal Issue 2. [New] Modify for DRAM init status check in UMA mode 3. [New] Support Customizded DRAM timing in binary level 4. [New] Support Virtual EDID 5. [Bug] Install RHEL hanged before enter into X-Window on Operon 6. [Bug] Modify for CRTC Timing for standrad mode & low resolution mode 7. [New] Add Support VESA Mode: 1280x1204, 1600x1200, 320x240, 400x300 and 512x384 --------------------------------------------------------------------------------- v.0.50.00: ycchen@10122005 1. The first release for A0