COMMENTS:

This EEPROM package is used for X10DRC/iT4 using two X540 B0 stepping LAN controller with NC-SI support on LAN1.


EEPROM REVISION INFO:
5) 540MNG42 (10/2/2014)
	a. 540MNG42.bin
		SMC version 	0x0015   0420h
		WOL is supported only on LAN1
				0x0038   014Dh
				0x002C	 FFF9h
		Ony activate NC/SI port during S3
				0x1003	 32C4h

4) 540MNG41 (8/28/2014)
	a. 540MNG41.bin
		0x0015   0410h - SMC version
		0x024B	 17F7h - Enable IOV Control Prefetch.
	b. 54040.bin
		0x0015   0410h - SMC version
		0x247    1528h
		0x248    15D9h - SMC SSID
		0x024B	 17F7h - Enable IOV Control Prefetch.
		0x0038	 014Ch - No APM
		 

3) 540MNG3B (4/10/2014)
	a. 540MNG3B file
		0x0015   030Bh - SMC version
		0x100B	 0013h - Allowed both Network to BMC and OS2BMC traffic.

2) 540MNG3A (2/12/2014)
	a. SMC revision for 5403A file.
		No Management Mode and no ISCSI.
		0x000   0541h
		0x015   030Ah
 		0x030	0120h
		0x033	402Bh  

	b. No change for 540MNG30 file.

1) 540MNG30 (1/10/2014)
	a. Based on Intel EEPROM rev. 4.3 (X540 MNG NCSI B0 v4.3)
	b. SMC rev 3.0
		Word 0x15  changes to 0300h		
		Word 0x247 changes to 1528h
		word 0x248 changes to 15D9h
	c. Activate ACPI power management wake up: (WOL in S1 mode)	
		word 0x38  changes to 014Fh
	d. Wake pin enable:
		Word 0x243 changes to 003Fh
	e. LED setting according to H.W design, HAS DIFFER SETTING FROM 540MNG2B :
		Word 0x265 changes to 0100h
		Word 0x266 changes to 0504h
	   	Word 0x26D changes to 0100h
		Word 0x26E changes to 0504h
	f. WOL support - both ports
		Word 0x2C changes to 0FFF5h
	g. Preboot - LAN1 defaulted iSCSI boot, LAN2 defaulted PXE boot with no SCSI
		Word 0x30 changeds to 0102h
		Word 0x34 changeds to 0120h