Steps to flash LAN EEPROM

1. Extract the files and Copy them to a bootable USB stick or to a bootable floppy disk. 
(If you don’t have a bootable USB stick you can make it using: http://www.softpedia.com/get/System/Boot-Manager-Disk/BootFlashDOS.shtml). 

2. If you have 3rd party LAN controller, please remove to prevent flashing on wrong target.

3. Boot up the system using the USB stick. 

4. At the command prompt type ---  <filename>.bat 

5. Enter the 12-digit LAN MAC address when prompted. 

6. AC on/off power cycle the system.