2016-2-17 1 LSISAS3108 model ARC1883/8380_D/8680_D/8681_D/8780_D If device is 12Gb and CRC error received, issue target reset to reduce link speed to 6Gb 2016-2-23 1 ARC1203:PCIE link broken when work with some MB 2016-3-18 1 Allows S2600CW to boot ARC-1883i in legacy BIOS mode, not just in UEFI. 2016-4-15 1 ARC1882 boot code return from power loss, do not reset SDRAM, or some SDRAM failed init 2 new BIOS code 2016-4-25 1 remove ARC1214/1201/1200 OPTIMIZE_HD_EDIT 2016-5-5 1 Modify all TCG erase request to support Toshiba 3.2T SSD block erase (timeout) 2016-5-6 1 SEAGATE HDD hot plug problem 2016-5-13 V1.53-20160513 1 MRVL5182 ARC1200/1201 : new BIOS only 2 MRVL9580 ARC1214 3 MRVL380 ARC1203 4 LSI Model New BIOS : ARC1880/1882/1883 6 Build ALL LSI models (A) 2116 : ARC1880/8040/8066/8366_D/8666_D/8665_D/8766_D (B) 2208 : ARC1882/8367_D/8667_D/8668_D/8768_D (C) 3108 : ARC1883/8380_D/8680_D/8681_D/8780_D (Phase12 PL, target mode SAS, PHASE10) 2016-6-14 1 ARC1882/1883:new BOOT code and ROM file built fix BBM problem 2016-6-21 1 ARC1880:add SUPPORT_HDD_SPEED_TEST 2016-7-1 1 Controller Evaluation Mode is added 2016-7-12 1 Modify stagger power on's LED control for 512 devices. 2 Remove HTTP guest account 2016-8-2 1 ARC1883/8681...:fix clone disk source/target 2016-8-18 1 ARC1214/5066 Fix ST6000VX0001-1SH17Z detection problem 2 ARC1264/5066 : fix HDD detection problem if HDD is attiched behind PM multiple SDB notification 2016-8-19 1 Add SUPPORT_TCG_SED gui support 2016-8-24 1 ARC8681D:fix restart controller problem: 2 fix flash based BBM with 4/8G ram, when power recovered 2016-9-19 1 ARC1203:build new version for event time error 2 ARC1883 thunderbolt support:new version for 8050T3-8/12/16 3 fix GUI support of clone disk function 4 add GUI support for SED function 5 add GUI support for SAS info 2016-9-21 1 build 154-20160921 ARC5066/ARC1203/ARC1214 2 Build ALL LSI models (A) 2116 : ARC1880/8040/8066/8366_D/8666_D/8665_D/8766_D (B) 2208 : ARC1882/8367_D/8667_D/8668_D/8768_D (C) 3108 : ARC1883/8380_D/8680_D/8681_D/8780_D (Phase12 PL, target mode SAS, PHASE10) 2016-9-30 1 Add EPC support 2016-10-4 1 Modify ARC5066 to support 8 bays model 2 Fix toshiba SSD THNSNJ960PCSZ (960GB)problem 2016-10-5 1 Fix SED hotspare support <1> Local hotspare non-SED HDD cannot be assigned to SED raidset SED hdd can be assigned to non-SED raidSet <2> Auto-rebuild If SED hdd is inserted and the system contains no SED raidset --> treat SED hdd as noraml HDD 2016-10-7 1 ARC1203:fix volume check + IOMeter hang, 2016-10-13 1 EPC support: LSI|9580|9215|1495 2016-10-17 1 Add SAS HDD phy error count display 2016-10-18 1 Add AJA support for subsystem 2016-20-24 1 ARC1882/1883:Add AJA_SEPARATE_RW_QUEUE, use the same behavior as subsystem 2016-10-28 1 Fix SED raidset roaming using GUI command failed 2016-11-1 1 Subsystem add "Host Command Queue Mode":(normal/ordered) (HOST_CMD_QUEUE_SETTING) if ordered is selected, AJA mode is disabled AJA mode and ordered queue are mutual exclusive if ordered is to be selected AV recording mode : set to disabled Read/Write performance margin : set to No Write Cache : set to Unified reboot required if "Host Command Queue Mode" is changed 2016-11-23 1 Add SUPPORT_QSAN_JBOD, All QSAN JBOD report the same enclosure logical ID in SMP report general 2 Build ALL models V1.54-20161123 (0) 9580 : ARC5066/ARC1203/ARC1214 (A) 2116 : ARC1880/8040/8066/8366_D/8666_D/8665_D/8766_D (B) 2208 : ARC1882/8367_D/8667_D/8668_D/8768_D (C) 3108 : ARC1883/8380_D/8680_D/8681_D/8780_D (Phase13 PL, target mode SAS, PHASE10)